stu861 Posted December 30, 2010 Share Posted December 30, 2010 i have just replaced the old green lights in my rev counter speedo ect now ive put it back together and only the right half except the temp guage lights work i had a few bulbs left spare so replaced the ones that did not come on but still no joy the rest of the dash is still not plugged in but that wouldnt cause it would it?? any ideas??? pic not very good but best i could get at the mo: Quote Link to comment Share on other sites More sharing options...
Stevo Posted December 30, 2010 Share Posted December 30, 2010 Dry solder on the conections? Quote Link to comment Share on other sites More sharing options...
stu861 Posted December 30, 2010 Author Share Posted December 30, 2010 (edited) Dry solder on the conections? how do u mean??? not to good with electrics mate heres a new pic, can see it better now its dark out Edited December 30, 2010 by stu861 (see edit history) Quote Link to comment Share on other sites More sharing options...
stu861 Posted December 30, 2010 Author Share Posted December 30, 2010 bump! Quote Link to comment Share on other sites More sharing options...
Josh Posted December 30, 2010 Share Posted December 30, 2010 Check the soldering. I don't know anything about electrics either. Quote Link to comment Share on other sites More sharing options...
nasoup Posted December 30, 2010 Share Posted December 30, 2010 Plug all the dash bits in then see if that works. Quote Link to comment Share on other sites More sharing options...
heckler Posted January 2, 2011 Share Posted January 2, 2011 what have you replaced the bulbs with? LED's either there in the wrong way round, or they dont work, if its bulbs - bulb is not woking, or the contacts on the green holder need bending up so they make contact with the green PCB Quote Link to comment Share on other sites More sharing options...
Rob W Posted January 2, 2011 Share Posted January 2, 2011 Yea this happened to mine the other day when I changed them to led bulbs. As Heckler said, bend the little contacts up and turn the bulbs around in the holders. Mine are working fine now. Quote Link to comment Share on other sites More sharing options...
stu861 Posted January 2, 2011 Author Share Posted January 2, 2011 done now cheers guys all back in but one indicator arrow not working now so got to take the dash all part again some time yey cant wait!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.