removing the passanger side a pillar

[jonshaw_uk]

I need some help please.
I recently purchased a sunvisor with a built in 7" tft screen that i want to link to my existing dvd + screen that i have in the dash. The thing is that i will need to get the cabling from the sunvisor to the back of the stereo. I thought that the neatest and easiest way to do this was to run them down the inside of the a pillar.

Any body got any ideas how to get the plastic surround out ?

I did a search but cant seem to find anything - anybody know how, all info would be much appreciated:)

[osso]

if its anything like the driver side a pillar, then there should be three clips along the top of the top of the a pillar, you need to pull downwards motion towards the floor.. then there should be 2 clips at the other end of the a pillar these should clip off by pulling towards you.

[colsoop]

I removed my passenger side recently.
I had to remove the grab handle first and then undo the screws behind it.
Then i did what osso said.

[jonshaw_uk]

many thanks guys

as soon as i get home then i will attempt to get it off and fit my new sunvisor screen

fingers crossed all will go well with out me breaking anything