18" Volk Challenge F Zero

Hi Guys,

Just wanted to know from the boy's who have these on thier supra's wheather they fit over UK brakes or not. Also will i need spigot rings to fit them on?

And does anyone know how much they weigh?

http://t0.gstatic.com/images?q=tbn:C5SweVqZudRZoM:http://i298.photobucket.com/albums/mm268/CG2PROJECT/IMG_0794.jpg&t=1

Thanks:)

"18" volk challenger" will fit uk brakes and yes you will need spigot rings .

Damn those are some lovely wheels! Going to look awesome

Lovely wheel that!!

Looks good

Yes with the correct width and offset they will clear the larger brake calipers. Yes you will need a spigot ring.

Thanks for all your replies guys

I really like these wheels and they are light weight too.

What makes them need spigot rings? I've never came across these when changing wheels on any of my cars????

they have to be tight to the hub spigot other wise there it too much load on the studs and can be dangerouse . aswell as cause wheel wobble

What makes them need spigot rings? I've never came across these when changing wheels on any of my cars????

The centre bore is bigger than 60.1mm? Maybe you were just lucky or werent aware....

Have them on mine - fit over my UK's no problem

What makes them need spigot rings? I've never came across these when changing wheels on any of my cars????

Most aftermarket wheels have a larger central hole so that they are able to fit different cars, a spigot ring is used to match the hole to the particular cars hub. I'm guessing there's a lot of car owners out there that don't realise they need a spigot ring and just bolt the wheels on. The spigot helps centralise the wheel and takes most of the loading.

I have these wheels without spigot rings (I think, I'll double check), what size spigot rings are needed?

Have them on mine - fit over my UK's no problem

Thanks thats all i needed to know

They look really nice on your car mate.

Guys I need your opinion on whether i should replace my current set of gunmetal grey Rota GTR's for these Volks Challenge FZero's?

The volks will need to be refurbished so the colour is not finalised atm.

http://t0.gstatic.com/images?q=tbn:C5SweVqZudRZoM:http://i298.photobucket.com/albums/mm268/CG2PROJECT/IMG_0794.jpg&t=1

Guys I need your opinion on whether i should replace my current set of gunmetal grey Rota GTR's for these Volks Challenge FZero's?

The Volks will be better made and should lighter in weight.

The Volks will be better made and should lighter in weight.

Thanks nic, What colour shall i have them powder coated to go with my white supra?

What colour shall i have them powder coated to go with my white supra?

What about gunmetal grey with polished ally or white on the raised detail?

Being a white car I think you could get away with some interesting combo's if you were brave enough!

Don't you prefer the SF Challenge with the lip?

I swapped my non-lip Challenge for some SF Challenge from dusty - awesome wheels!

gunmetal grey with polished ally

I like the sound of this bud

Being a white car I think you could get away with some interesting combo's if you were brave enough!

If I was brave enough i would have tried Gunmetal Grey with Blue Details

Don't you prefer the SF Challenge with the lip?

 

http://onfinite.com/libraries/1292404/bd0.jpg

 

 

I swapped my non-lip Challenge for some SF Challenge from dusty - awesome wheels!

These wheels are awesome mate I would actually prefer these on my car.

I bet these are ultra rare to buy second hand.

They were only £2500 or so from the states.

plus tyres.

What about gunmetal grey with polished ally or white on the raised detail?

I've not found anyone who can do a different effect on the raised detail

I've not found anyone who can do a different effect on the raised detail

Oh no what about Ibrar from Speedwells?

Oh no what about Ibrar from Speedwells?

He was the first person I asked.