Jump to content
The mkiv Supra Owners Club

uk inlet manifold


mark newman
 Share

Recommended Posts

No. I got a polished inlet manifold and throttle body, from Paul at whifbitz who sent out a jspec. I can't remember the differences but I did start adapting it and gave up as it was easier to just get mine polished.

 

Converting the jspec to UK spec, the throttle cable bracket has to be modified as the bolt holes don't line up. I think there are less vacuum line connections, there's a hole to be blocked off and one to be drilled and tapped I think. One of the manifolds had a large thredded hole. And then there's the egr valve on the back of the manifold. I think it was the support bar I went to fit and found that the bolt sizes were different.

 

The throttle body should fit, the difference being that the UK has some soft of damper fitted to the throttle pulley with a vacuum line attached to the underside of the throttle body. Although thinking about it, it could be a auto/manual difference not a UK/jspec difference.

Edited by Rich8v (see edit history)
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.