Jump to content
The mkiv Supra Owners Club

Inferno's Supra: Restored & Built From The Ground Up


Inferno
 Share

Recommended Posts

CLICK HERE to view the index for the entire build.

 

 

Hi everyone,

 

Please excuse the length of this thread, but I wanted to document the entire build, from the beginning of my ownership of the Supra, to the day I considered it "complete". I will start with some background, and then detail the entire build from start to end - if you are not one for reading the story behind a Supra or a build, then feel free to fast forward to the photos :). I will also include reasons for purchasing certain parts, which vendors I chose to use and why, trials, tribulations, ups and downs, and things I learned along the way. I understand that not everyone will appreciate all aspects of the build, parts chosen, avenues taken, but as with almost anything car related, it all comes down to personal preference and subjectivity.

 

 

The Beginning - The Purchase:

 

It was 2005 and I had just finished putting myself through university. Never having been a "car person", I was totally clueless when it came to cars and only saw them as a means of getting from A to B. However, I needed a car as I was sick of taking public transport everywhere, so I decided to start looking for something interesting. I knew I wanted a sports car, but I also found out that in Australia, decent sports cars cost an insane amount of money. To put this into perspective, lets look at the Porsche 911 Carrera. At the time of writing this, in the US, a new one retails for USD$87000 (AUD$96000). Guess how much it costs in Australia? USD$202000 (AUD$225000). How about a BMW M3? In the US it will set you back USD$70000 (AUD$78000), here in Australia it will cost you USD$153000 (AUD$170000).

 

After doing some research and looking at car weights, power figures, performance figures etc, I realised that Japanese imports were an excellent option for fast, well priced sports cars! I had previously had great experience with the reliability of Toyotas, and so I had the Soarer (AKA SC400) in my sights. I was trying to decide between the 3 variants (http://www.sportsluxurycars.com.au/vehicles/toyota_soarer.htm) - 4.0L V8, NA inline 6 or the 2.5L Twin Turbo. It did seem like a bit of a heavy car, and every specimen I inspected at various car dealers was pretty average in terms of looks and condition. All of a sudden, I started noticing the Supras for sale. I then thought, "I don't really need a luxury cruiser, a sports car is what I want", and I started to fall in love with the looks and styling of the Supra. Lucky for me, importers had started to bring in Supras by the hundreds from Japan, so there was no shortage of possibilities, colours or variants. At the end of 2005, I had been researching the Supra scene, the various models, production history, optional extras, year models and associated price ranges. I looked at MANY, and found 2 that looked too good to be true, but unfortunately missed out on them. The first was this stock red beauty:

 

attachment.php?attachmentid=176876&stc=1&d=1384079438

 

attachment.php?attachmentid=176877&stc=1&d=1384079438

 

attachment.php?attachmentid=176878&stc=1&d=1384079438

 

The other was this subtle silver number:

 

attachment.php?attachmentid=176879&stc=1&d=1384079438

 

I also joined the local Supra club and purchased some nice memorabilia:

 

attachment.php?attachmentid=176880&stc=1&d=1384079438

 

Then, in November, I found what I wanted. It was a 1994 white GZ (the top of the range Supra model at the time of its release in Japan - airbag, optional side and rear skirts, active front spoiler, leather seats). At this stage, the car had been inspected by a mechanic for possible problems, history check and other various checks I had performed to ensure everything was as described (odometer had not been wound back, no accident history, clear of debt etc), and all was OK.

 

However, I had never driven or been a passenger in a Supra before, so I had no idea what to expect in terms of performance and general feel of how it drives. So I posted up a help me thread on the Australian Supraforums: http://supraforums.com.au/forum/showthread.php?t=13898 . I basically wanted someone who knew Supras to take it for a test drive to ensure it drove as it should (turbos working, autobox operation etc). Everything checked out, so I made a visit to the bank, then to the dealer and was soon on my way with my new Supra!

 

Here is how the car looked when it first came home:

 

attachment.php?attachmentid=176881&stc=1&d=1384079438

 

attachment.php?attachmentid=176882&stc=1&d=1384079438

 

attachment.php?attachmentid=176883&stc=1&d=1384079438

 

attachment.php?attachmentid=176884&stc=1&d=1384079438

 

attachment.php?attachmentid=176885&stc=1&d=1384079438

 

After some TLC:

 

attachment.php?attachmentid=176886&stc=1&d=1384079438

 

attachment.php?attachmentid=176887&stc=1&d=1384079438

 

attachment.php?attachmentid=176888&stc=1&d=1384079438

 

attachment.php?attachmentid=176889&stc=1&d=1384079438

 

attachment.php?attachmentid=176890&stc=1&d=1384079438

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

7.jpg

8.jpg

9.jpg

10.jpg

11.jpg

12.jpg

13.jpg

14.jpg

15.jpg

Edited by Littler
Tidy (see edit history)
Link to comment
Share on other sites

  • Replies 722
  • Created
  • Last Reply

Top Posters In This Topic

Wheels, Tyres & Modifications Being

 

The first thing I wanted to do was get some new wheels and tyres, I felt that the white was begging for a nice contrasting colour, and the ratty old silver rims just weren't doing it for me, so I sold them:

 

attachment.php?attachmentid=176891&stc=1&d=1384080616

 

attachment.php?attachmentid=176892&stc=1&d=1384080616

 

 

I found a perfect set of Gold Gewalt Evolution rims. They were extremely rare (no longer manufactured) and were in amazing condition: I was lucky to get them, and for a great price too! I negotiated a price for the rims and a set of tyres from a Japanese parts importer operating as a trader on a local online Nissan forum:

 

attachment.php?attachmentid=176893&stc=1&d=1384080616

 

So they went on the car:

 

attachment.php?attachmentid=176894&stc=1&d=1384080616

 

attachment.php?attachmentid=176895&stc=1&d=1384080616

 

I also decided to have the brake calipers painted by a bodyshop and some new stickers applied:

 

attachment.php?attachmentid=176896&stc=1&d=1384080616

 

attachment.php?attachmentid=176897&stc=1&d=1384080616

 

 

As I previously mentioned, performance was a big factor in my decision, so I decided to have the car dyno tested before I started any modifications so that I would have a baseline figure to compare with:

 

attachment.php?attachmentid=176898&stc=1&d=1384080616

 

 

The bomex front bumper at this stage was really starting to annoy me, I never particularly liked the look of it, and it was an absolute nightmare when it came to driveways and speedbumps, regardless of how slowly I took it:

 

attachment.php?attachmentid=176899&stc=1&d=1384080616

 

So, I decided to find a stock front bumper and use that - however I soon realised I would also need the lip to attach to the bottom... the car looked ridiculous with the front bumper but no lip. Luckily, there is a great Australian Supraforums member who runs a business primarily catering to the Supra community, and I was able to obtain a fairly well conditioned stock front bumper:

 

attachment.php?attachmentid=176900&stc=1&d=1384080616

 

attachment.php?attachmentid=176901&stc=1&d=1384080616

 

Which I had cleaned up and resprayed:

 

attachment.php?attachmentid=176903&stc=1&d=1384081654

 

However this did not come with the stock lip, so I just purchased the bumper by itself and bought another bumper (lip and all) from another Australian Supraforums member, removed the lip and sold the front bar. At this stage, I was quite happy with how the car looked:

 

attachment.php?attachmentid=176905&stc=1&d=1384081654

 

attachment.php?attachmentid=176906&stc=1&d=1384081654

 

attachment.php?attachmentid=176907&stc=1&d=1384081654

 

 

Power!

 

I started spending more time on the Supraforums, including the US Supraforums, UK Supraforums and Australian Supraforums - participating more and more, doing a lot of reading, and watching a lot of videos of Supras demolishing much more "exotic" cars.

 

I got the modding bug.

 

Research showed me that the best bang for buck upgrade I could do would be to replace the standard stock ceramic Japspec twins with their steel counterparts from the US. So I enlisted stock twin expert Stuart Hagens help and advice. After many long hours discussing the differences between the Japspec and USspec turbo system (turbos, downpipes, flanges etc) and trawling for sale threads to find a set of low milage turbos, Stuart had managed to secure a number of sets of twins with the first and second turbos in varying conditions. With his experience, he measured and checked numerous sets, eventually putting together a set with both turbos in almost perfect condition and minimal shaft play.

In addition, all required gaskets, flanges, pipes and hardware was purchased from Curt @ Elmhurst, polished up and shipped to me.

 

attachment.php?attachmentid=176908&stc=1&d=1384082530

 

At this stage, I also decided to do some other upgrades. So the stock SMIC was given the flick, replaced by the renowned Greddy 3 row. The stock exhaust was changed to a Tanabe Super Hyper Medallion due to its stock look and low noise levels (here in Australia, police are very strict when it comes to exhaust noise and appearance). The cats were removed, and a single hi-flow cat put in their place to avoid potential fines, a Blitz SBC I-color boost controller to tame the new twins, larger injectors to feed more fuel to the engine and keep up with the increased boost, a new intake (got rid of the stock airbox), polished cold air intake shield and various other goodies:

 

attachment.php?attachmentid=176909&stc=1&d=1384082530

 

attachment.php?attachmentid=176910&stc=1&d=1384082530

 

attachment.php?attachmentid=176911&stc=1&d=1384082530

 

 

Next up was replacing the ugly Pioneer stereo that came with the car with a nice subtle looking Sony head unit, sold the cannon/tube subwoofer and replaced it with 2 12" Pioneer subwoofers in a custom box.

 

attachment.php?attachmentid=176912&stc=1&d=1384082530

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

7.jpg

8.jpg

9.jpg

10.jpg

11.jpg

13.jpg

15.jpg

16.jpg

17.jpg

18.jpg

19.jpg

20.jpg

21.jpg

22.jpg

Edited by Littler (see edit history)
Link to comment
Share on other sites

During the time I was making these small modifications, I had found my mechanic for life. A gentleman by the name of Paden who runs a workshop called Unique Automotive. He is basically capable of anything related to cars, from general servicing, troubleshooting, to turbo installs, dyno tuning, electrics and other performance modifications. On top of this, he is extremely humble and well spoken, a genuinely nice, honest person and is known as THE Supra Mechanic here in Australia. He charges rediculously small amounts for the work performed, and if you try and give him a tip or pay a little extra to say thank you, the money gets pushed back your way.

 

I digress. At this stage, the parts were installed and the car tuned for the new additions:

 

image

image

 

 

 

It was at this stage that I decided I wanted to change the look of the car... I did love how it looked, but the TRD widebody threads I had seen on the US supraforums started to make me look at my Supra in a different light. I loved the look of the TRD widebody, but at that stage, I had some pretty bad experiences involving terrible paint and bodywork done locally, so there was no way I would trust these people to do a widebody conversion. I knew exactly what I wanted it to look like, and that was bludemons custom widebody. Ever since I first saw it, there was just something about it that really did it for me: in my eyes, it was the best looking Supra I had ever seen. If it was possible, it seemed like he had managed to tastefully modify a Supra to look more like a Supra than in it's standard form. I feel the same way about the "standard" TRD widebody conversions - you end up with a Supra that still looks like a Supra but meaner and wider. There was no denying that my future car would borrow looks from his - skirts and front bumper that flow well together but do not detract from the Supras stylish, curvy looks.

 

After a lot of research, back and forth emails and phone calls etc, I realised that widebody TRD skirts would just not fit, and having a custom set made to imitate them in non-widebody form would be a pain. As such, I followed in the footsteps of StSupDog and decided I would modify some Blitz sideskirts, the closest to TRD widebody skirts that is easily available. I purchased the skirts from Dusty @ MVP and had them shipped over. During this time, I had been doing a LOT of research into local painters/bodyshops who would be worthy of the job of modifying, painting and fitting the skirts. Luckily, through the Australian Nissan/Skyline forums, I was able to find a reputable man for the job, the only bad things said were that he took too long as he was a perfectionist.

 

In addition to this, I knew I wanted a colour change. Sure I loved the white, the fact that it always looked clean and the way the gold wheels contrasted with the paint, but I also was sick of the fact that it would never look as deep and reflective as a black car. I could spend hours and hours detailing it, and sure it would look great, but if I spent 6 hours detailing it, it simply would just not look THAT MUCH better than when it was just cleaned really well and polished/waxed properly. After looking at every paint manufacturer and colour under the sun, I decided that there were too many shades that I liked the look of - bludemons, various UK Supraforums members, OEM lamborghini and aston martin colours... the list went on and on, and my hard disk was sick of me saving pictures of all these cars and their slightly different shades of grey/silver. So, I decided on BLACK and set out to find the deepest, most reflective black I could. I decided I did not want a pearl or any flake in the paint, but just a pure black that would give me the best possible reflections when taken care of properly. I had previously posted up a thread out of interest to get opinions on black paint and maintenance (http://supraforums.com/forum/showthread.php?t=400531), but at the end of the day, I knew I wanted black, along with all of its ups and downs and I didn't care that it would be covered in dust 5 minutes after I had finished spending 2 hours washing it.

 

So, the plan was to have the skirts modified, fitted and primed along with the front bumper by the fibreglass "specialist". Then the car was to be sent to the mechanic to have the engine removed and then to the paint shop to respray the engine bay. After this, the car would go back to the mechanic, have the engine replaced, then back to the paint shop for the rest of the respray.

 

The skirts were soon modified and fitted:

image

image

 

 

 

The car was then sent to the mechanic, the engine removed, then towed to the bodyshop:

 

image

image

image

 

 

I also opted for new stock front fenders. At this stage, the skirts were on, the new front fenders were on, and the engine bay was sprayed black:

 

image

image

image

 

image

image

image

 

image

image

 

image

Edited by Littler (see edit history)
Link to comment
Share on other sites

In the mean time, I had many of the stock parts chromed by Brian Koshy (OHRLY - RB Chroming), including the intake manifold, throttle body, turbo pipes, intake pipes, greddy piping, battery clamp, . I also purchased a new radiator from Curt @ Elmhurst. I also reconditioned the engine harness myself, painting faded plugs and wires in their original colours, new loom and wire protection, new electrical tape etc, all to get the harness looking almost as good as new.

 

image

image

image

image

image

image

image

image

image

image

image

image

image

image

image

image

image

image

image

image

Edited by Littler (see edit history)
Link to comment
Share on other sites

First Purchased:

 

image

 

After Modifications:

 

image

 

image

 

 

I had ordered some Top Secret Gold Volk GT-C's, with BFG tyres from Dusty @ MVP, and had these sitting in my room:

 

image

image

image

 

image

image

 

 

 

 

Also some cross drilled, slotted Rotora replacement rotors:

 

image

image

image

 

 

 

In addition, I had ordered a new stock rear bumper, as the JSPEC ones have a huge hole cutout for the Japanese sized numberplates. Unfortunately, here in Australia our numberplates are quite a bit smaller, so we end up with an ugly gap on either side.

 

image

image

 

 

 

Whilst the car was at the mechanics having all of the new parts put in and the engine replaced (I knew the mechanic had a huge backlog so it would take some time), I was doing more forum surfing than ever. I was admiring all of the amazing builds being undertaken in the US and around the world.

In the back of my mind, I was thinking "my Supra is going to look amazing, but lets face it, you are trying to emulate a widebody, and you know you want more power".

 

Next, I made a huge decision. I thought "hey, I work extremely hard, don't use drugs, don't gamble and really don't reward myself. The Supra is my only indulgence in life, why not turn it into my dream car - make it exactly what I want, not some toned down, emulated version of it?".

 

Prior to this decision, I had done a LOT of research into local bodyshops, workshops and engine builders. In addition, I had also had bodywork done by various local shops with some good and some AWEFUL results. I also saw that the boys in the USA had been building high horsepower Supras for quite a few years and had a LOT of experience with the 2JZ engines and Supra framework. In addition, they definitely had fitting of the TRD widebody kits down to a fine art - I had literally not been able to find a single bad example when a good quality kit was used as the basis of the work. The guys at SP were fine tuning their aftermarket sequential Twin Turbo kit, but unfortunately, it required in-house fabrication and installation.

 

Many will argue that the car could just as easily have been built here, but the fact of the matter is that I made the decision to send it overseas based on my previous experiences with the local automotive industry. I lost a LOT of faith in local "experts", and many can attest to the number of such shops (e.g. Nathan and his TRD widebody build). I am sure there are many shops around Australia who people will say could have undertaken the bodywork, but after having spoken with the guys in the USA, they all had connections with various experts who had PROVEN work done for them on Supras. For example, the guys at SP had a bodyshop guy they had known for quite some time and churned out flawless jobs on every single one of their Race cars, shop Supras and their customers Supras. In addition, they had engine builders who they had been dealing with for the better part of a decade, connections with engineers at Toyota, with developers of aftermarket ECU products and software etc. For example, MVP Motorsports have been building top-spec 2JZ stroker motors since they have been available, using some of the best engine builders and cylinder head technology available (CNC).

 

Not to mention no local workshops had produced anything like the aftermarket Sequential Twin Turbo system SP had developed - one of the major selling points for me!

 

As a result of this, I emailed Dusty at MVP Motorsports on the 19th of November 2007 and then followed up immediately with a phone call. The jist of the phone call was this: Dusty: I want to ship my car to the US, have a modified TRD widebody kit fitted and have the engine built and a turbo install performed which would give me maximum low end power and torque with minimal lag.

 

My reasoning for the low end power is that here in Australia, we simply don't have the same highway formation as in the US, so highway races are few and far between - the majority of "races" are from a dig at a set of traffic lights (for example). Whilst I am not a street racer and would never risk the lives of others, a low RPM torque monster was much more attractive to me than a higher horsepowered beast that stretches its legs when racing from a roll.

 

The car was not only going to have a widebody conversion and a respray, I wanted to replace EVERY SINGLE PART: I WANTED A 2009/2010 Toyota Supra :-). So, I soon started to write out a list of every single part and modification required to build my dream car, and started ordering the parts. The plan was to ship the car via ocean freight in its own container, and I would fill the interior of the car to the brim with the parts to be used (as well as some extra boxes that would go on a pallet in the container with the car).

 

So the car went to the port for shipping:

image

Edited by Littler (see edit history)
Link to comment
Share on other sites

I also thought that getting new gauges would be a nice addition to the interior:

 

image

image

image

 

 

 

Not to mention some old school JDM accessories... TRD Fuel Cap Cover:

 

image

 

 

and the requisite Greddy Radiator Plug:

 

image

 

I also purchased a New TRD Radiator Cap as I was undecided between the two :-):

 

image

 

 

Greddy Clamps:

 

image

 

 

To add some more shine to the engine bay, I decided to go for a Chromed Radiator Pipe (chromed thanks to RB Chroming):

 

image

 

image

 

 

Some more Chromed Engine Bay Goodies to spice up the engine bay:

 

image

 

image

 

 

I also wanted to replace the old ratty mirrors with New OEM Mirrors:

 

image

 

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

To renew some of the aging parts at the rear of the car, I decided on some New Rear Hood Struts:

 

image

 

 

Next up was the complete refresh of the interior.. including New OEM Interior Trim:

 

image

image

image

 

I purchased a New OEM Shifter Knob:

 

image

 

image

 

 

Also a New OEM Footrest to clean up the floor area of the Supra:

 

image

 

 

And a New OEM Pedal to go alongside:

 

image

 

 

Can't miss the New OEM Accelerator!

 

image

 

 

I also opted for New OEM Door Trim to further ensure every part looked nice and new - no aging weather seals or trim here!

 

image

image

image

 

image

 

 

To complete the rear once all of the other parts were renewed, I also added a New OEM Rear Blind:

 

image

 

 

 

For the engine bay, I always liked the look of the stock radiator and shroud as I felt it was quite subtle and the lines worked well with the rest of the engine bay... so I purchased a New OEM Fan Shroud:

 

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

After years of abuse from the previous owner, I felt it only appropriate to renew more of the door/side trim, so I added some New OEM Door Scuff Plates:

 

image

image

image

 

 

Along with that shipment came the brand spanking New OEM Fenders!

 

image

 

image

 

 

To take advantage of the huge shipment, I added in a New OEM Cowl, which often look ratty and run-down in many of the older Supras:

 

image

image

image

image

 

 

I also was lucky to score some New OEM Mats from a Toyota dealer who apparently lived in the dark ages and still had some really old (but unopened - i.e. New) stock available:

 

image

 

 

This part number was a real pain in the ass to find, but once I found it I ordered it straight away... a New OEM Underpanel:

 

image

 

image

 

 

My handbrake was also looking a bit worn out after 15 years! So I added a new one to the order:

 

image

 

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

New OEM Dash Panels (continued!):

 

image

image

 

 

To liven up the engine bay a bit more, I also purchased some PHR Engine Bay Goodies:

 

image

 

And a New Fields Harness for any required ECU changes to avoid hacking up my beautiful new harness!

 

image

 

 

As I would be refreshing the entire underbody of the Supra, I wanted to ensure the wheel wells were immaculate, so I started off with new OEM Fender Liners:

 

image

image

image

 

image

 

New OEM Mud Flap:

 

image

 

 

To go along with the front bumper, I got ahold of a set of new OEM Turn Signals:

 

image

 

image

 

 

Also after looking through the Toyota EPC for hours and hours, I had come up with some more OEM Underhood Parts I had previously missed:

 

image

image

image

image

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

I also was a bit worried about how ratty my petrol tank flap and opening looked, so I went for all new OEM Fuel Parts:

 

image

image

image

 

image

 

 

Thanks to Curt, I also added some new OEM Rear Quarter Windows to this shipment which I thought would set the exterior off nicely - especially as purchasing new rear quarter windows was really the only way I could refresh the trim around them:

 

image

 

image

 

 

Of course I had to get new OEM Stickers and Logos for the outside to let everyone know it is a Toyota Supra! ;-)

 

image

image

image

 

image

image

 

 

 

The rear 3rd stop lights can also look quite aged, and once again, the only real way to refresh the trim is to purchase a new one:

 

image

image

image

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

At this stage, the car had landed in the USA (Houston to be specific), and was then transported to MVP Motorsports. I had previously spoken to Dusty @ MVP, Chris and Larry & SP regarding the build and had decided on the avenue the car was to take. Basically I wanted to increase displacement to 3.4L, with my main concern being quick spoolup of the turbos and low end power/torque. As the aim for the car was a street car, this was the most important aspect of the mechanical side of the build. I did not feel the need for a 1500HP drag car, but wanted an engine setup capable of extreme low end power, high rev limit, and virtually bulletproof for producing a decent amount of power. As a result of my requirements and aims/goals, we decided to start with a brand new OEM engine, consisting of a complete new longblock, head, all associated OEM parts (pipes, tubes, gaskets, seals, nuts, bolts, retainers, hoses etc).

 

So, the engine build started with a brand new OEM head and block, along with an HKS 3.4L stroker kit to be used. MVP would build the stroker, including reworked oil passages, bored, decked and honed, new factory thrust washers as well as installation of billet mains.

 

I also decided to go with To further reduce mass of various engine parts, I opted for shimless buckets.

 

Previously, I had obtained some JUN camshafts, a brand very well known for top quality products in Japanese engine builds. I chose cams which were of shorter duration as I never had intentions for extreme HP levels and research had shown that a shorter duration cam with higher lift would allow the engine to breathe, turbos to spool quickly with very little resulting lag. I ended up choosing 256/264 intake/exhaust with 9.3mm lift.

 

For the head, I chose to use PHR's services as they had received an enormous amount of feedback on their heads and also, Joe was an absolute pleasure to deal with - what a great guy! I had the new OEM head sent to PHR and had them perform their "CNC Ported & Polished race cylinder head" treatment on it. They were to liaise with MVP for the stroker build, shimless bucket conversion and JUN cam installation and degreeing.

 

As I eluded to earlier, the plan was to build the hell out of the engine so that for all purposes it was as bulletproof as I could make it, so after some further consultation with Dusty @ MVP, Joe @ PHR and Chris & Larry @ SP, I went for Ferrea valvetrain components (titanium where possible), HKS Head Gasket, L19 ARP Head Studs, ARP Main Crank Stud Kit, Titan Billet Main Caps, and Power Enterprise Bearings.

 

I was fortunate enough to have the first ever PHR RHD breather kit fabricated and installed on the engine. New OEM valve covers were ordered, modified for the breather kit and chromed.

 

To give the engine a bit of shine, I went with a new oil pan which was chromed, a new oil pan baffle plate, new oil dipstick, chromed dipstick cap and a new OEM timing belt cover which was chromed.

 

Whilst PHR was doing their work, I also opted for the PHR EGR Block Off Plates.

 

Next up was the decisions to make regarding engine accessories and other parts that needed upgrading or replacing. I started with a PHR Billet Timing Belt Tensioner Bracket which was chromed (once again, thank you to RB Chroming for their amazing work!), new Crank/cam position sensors, a TTC Performance Idler pulley, Unorthadox Racing Alternator Pulley, a New OEM Power Steering Pump, Unorthadox Racing Power Steering Pulley, and an Unorthadox Racing Water pump pulley.

 

There were various other parts which I felt were lacking in performance or looks, so I decided to replace them with aftermarket parts. For example, the chromed TTC Waterpump pulley cover, TRD 160 Degree Thermostat, Unorthadox Racing Lightened Pulley Set and a PHR Modified Oil Pump.

 

Of course, I also had to add the TRD Oil Cap :-).

 

 

After all was said and done, the engine spec was as follows:

 

New OEM Toyota Shortblock

New OEM Toyota Cylinder Head

ALL NEW OEM Parts for building OEM longblock

HKS 3.4L Stroker Kit

MVP Built Stroker - Line Honed, Bored, Decked, Reworked Oil Passages, new factory thrust washers

Shimless Buckets

PHR CNC Ported and Polished Race Cylinder Head

Ferrea Dual Valve Springs

Ferrea Titanium Retainers

Ferrea Valve Guides

Ferrea Valve Locks

Ferrea Valve Seals

Ferrea +1mm Titanium Valves

Ferrea Spring Seat Locators

HKS 1.6mm Stopper Metal Head Gasket

L19 ARP Head Stud Kit

ARP Main Crank Stud Kit

JUN Camshafts 256 intake 9.3mm lift

JUN Camshaft 264 exhaust 9.3mm lift

JUN Cam Gears (was Unorthadox Racing)

Titan Billet Main Caps

Power Enterprise F-1 Rod Bearings (Brown)

Power Enterprise F-1 Crank Bearings (Green)

Power Enterprise Center Bearings

New OEM Coil Packs

New OEM Cylinder Head Covers (Valve Covers) - Modified for breather kit and chromed

PHR Engine Breather Kit (First Ever RHD!) - Chromed with Nickel Fittings

New Screws, Bolts, Washers, Gaskets, Piping, Clamps, Threads, Nuts

ATI Crank Pulley

HKS Timing Belt

PHR EGR Block Off Plates

New Oil Pan - Chromed

New Oil Pan Baffle Plate

New Oil Gauge/DipStick

Dipstick Chromed Cap

New OEM Timing Belt Cover - Chromed

New OEM Rear Engine Oil Seal

New Camshaft Oil Seal

New Valve Ventilation Hoses

New OEM Timing Belt Guide

New OEM Tensioner Assembly

PHR Billet Timing Belt Tensioner Bracket - Chromed

New Crank/cam position sensors

TTC Performance Idler pulley - chromed

Unorthadox Racing Alternator Pulley - Chromed

New OEM Power Steering Pump

Unorthadox Racing Power Steering Pulley - Chromed

Unorthadox Racing Water pump pulley - Chromed

TTC Waterpump pulley cover - chromed

TRD 160 Degree Thermostat

Unorthadox Racing Lightened Pulley Set - Chromed

PHR Modified Oil Pump

Powerhouse Racing Alternator Upgrade for 1993-98 Supra - 175 Amp - Chromed

TRD Engine Mounts - Chromed

New OEM Engine Mount Brackets - Chromed

NGK Iridium Spark Plugs

TRD Oil Cap

Edited by Inferno (see edit history)
Link to comment
Share on other sites

After much discussion with Dusty and the guys at SP, the engine build started:

 

I'm sure many of you have seen the HKS stroker kits before, but if you have not, the quality is second to none, and the components are of mind blowing quality:

 

image

 

image

 

image

 

image

 

 

image

 

image

 

image

 

image

 

image

 

image

 

image

 

image

 

image

 

image

 

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

image

 

image

 

image

 

image

 

image

 

image

 

image

 

image

 

 

My Parts had also arrived and Dusty kindly put aside a shelf to store them on:

 

image

 

 

The old engine was removed:

 

image

 

 

image

 

image

 

 

and the newly built stroker was put in (note that at this stage, the chroming of some parts was not yet complete - e.g. engine mounts, pipes, new mount brackets, hooks):

 

image

 

image

 

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

At this stage, I became a bit obsessed with weight savings. Even though I wanted to go widebody, build the engine, and do other mods that may add weight, I wanted to balance out as much of that as I could with various other lightweight ocmponents. Not only to reduce the overall weight of the car, but to reduce drivetrain loss and unsprung weight.

 

First up was a Custom Carbon Fiber DriveShaft:

 

image

image

 

 

I also opted for a NEW Toyota Auto Trans, rather than using my old one. The new unit was sent to BL to be Built and mated with a new Torque Converter appropriate for my goals:

 

image

 

 

To further clean up the underside of the car, I decided to purchase a New OEM Rear End:

 

image

 

 

 

image

 

 

As off-the-mark acceleration was my primary goal, I spent a LOT of time trying to track down the elusive 4.26 Auto Ring & Pinion Gear Set from PHR, and finally managed to get my hands on one:

 

image

image

 

 

To finish off the rear end nicely, I ordered a New TRD Diff:

 

image

 

 

To help put some of the power to the ground and to retain some degree of ride comfort, I decided to go for a set of the well known HKS Drag Coilovers. I was extremely lucky as about one month after I purchased them, the announcement of their discontinuation came through:

 

image

 

 

The transmission also came back from being built:

 

image

image

image

Edited by Inferno (see edit history)
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.