PDA

View Full Version : AEM Complete Kit


dandan
07-06-04, 18:56
Hi Paul,

Could you please provide me with a list of parts and prices for the necessary components required for a 1996 RZ mkiv on stock turbos?

I am at the point where I MAY be able to sort out a great deal insurance wise and now may be the time to slip in some form of programmable engine management for future use......(should I decide to go down the single route)

I already have a wideband sensor and display, albeit not an AEM type. What would I need?

ecu
ecu wiring harness
iat sensor
map sensor
wideband sensor (Currently Bosch 6066)
ignition amplifier
anything else?

Thanks very much Dan

I take it you wouldn't recommend any other type of system...Emanage etc

Paul Whiffin
09-06-04, 00:11
Email sent.

MONKEYmark
09-06-04, 08:24
how much for these paul


GM 3 Bar MAP Sensor................................Part Number = GM 12223861
GM 3 Bar MAP Sensor Connector......................Part Number = GM 15305891
GM Intake Air Temp Sensor..........................Part Number = GM 25036751
GM Intake Air Temp Sensor Connector................Part Number = GM 12102620


GM Boost Controller Solenoid
----------------------------
GM Typhoon 3-port Boost Solenoid...................Part Number = GM 1997152
GM Typhoon 3-port Boost Solenoid Connector.........Part Number = GM 12102747


also is the ecu wiring harnes an optional extra, and is there any difference on facelift cars. as i have found a few things dont work on facelift ie blitz turbo timer wiring harness and also the trd 10k tach

thanks


soz for hijack thought i would put in here as its to do with aem