BOV Bung, Where to get

For installing an aftermarket BOV

I found that its a 20mm bung i need but not sure where to get it.

B&Q? Somewhere like that.

Not able to get to the shops to check, want to know for when i get back so i can go get it or buy it online.

Cheers

i used the rubber end from a walking stick with a jubilee clip as a temp measure (that was over a year ago and its still on there)

i used the rubber end from a walking stick with a jubilee clip as a temp measure (that was over a year ago and its still on there)

same with me

I seen that on my searches but was looking for something a little better than that.

Ie something that the heat wont affect.

Cheers

When I fitted my first Bov, had the same problem, short section of metal bar did the trick.

Didnt think of that, trip to b&q might do the trick

19mm bud

Moved from Tech.

Sorry thought it'd be more techy than chatty

Cheers scott, any luck with the bung or has that one been sold

Got the very thing you need mate, just been out and found the proper bung used for blocking that pipe off. I bought a couple when fitting my B.O.V, Pm your address and its all yours

You my friend are a legend.

^^That's the one you need mate

GReddy do them http://www.trust-power.com/14others/g_cap.html

Thanks for the link Nic,

SupraD06 came through for me and is sending out the metal one

Received the bung mate.

Great club spirit. +1 Karma

In the same pickle, tried the Motor factors over here useless told to go to toyota , ha ha

Any suggestions?

Anyone no where to get one of these bungs for replacing the stock bov to aftermarket?

Anyone no where to get one of these bungs for replacing the stock bov to aftermarket?

http://www.ebay.co.uk/sch/i.html?_sacat=0&_from=R40&_nkw=Silicon+bung+blank&_sac=1#seeAllAnchorLink

What happened to the walking stick bungs we use to use lol

http://m.ebay.ie/itm/260999596168?nav=SEARCH&sbk=1

Cheers lads walking stick end haha good idea might have one in the shed. It needs to be 19mm is that right?

Think its 19mm, back in my day we didn't have these highly sophisticated silicon bungs lol I have two walking stick rubber bungs in place about six years now

Just had a look at your engine bay haha I've seen them on there 6 years good enough proof that they work . Cheers mate

If you want a metal one like the one i posted, here is the link

http://www.ebay.co.uk/itm/Metal-Aluminium-Blanking-Plug-Bung-Silicone-Hose-Dump-Valve-Bov-End-Cap-solid-/221339650950?pt=UK_Car_Parts_Vehicles_Automobila_ET&var=&hash=item3388df0b86

If you want a metal one like the one i posted, here is the link

http://www.ebay.co.uk/itm/Metal-Aluminium-Blanking-Plug-Bung-Silicone-Hose-Dump-Valve-Bov-End-Cap-solid-/221339650950?pt=UK_Car_Parts_Vehicles_Automobila_ET&var=&hash=item3388df0b86

Thanks all sorted