n/a induction pipe

anyone replaced there oem pipe with silicon/hard pipe i want to know what diameter the silicon pipe is that fits on the throttle body

and is it a 90 degree bend i need --thanks

anyone replaced there oem pipe with silicon/hard pipe i want to know what diameter the silicon pipe is that fits on the throttle body

and is it a 90 degree bend i need --thanks

ive got 75mm pipe on my throttle body.

thanks barney ,if im gonna fit an ally pipe into the 75mm silicon what size should that be ??

what i want to achieve is silicon pipe from the throttle body then 90 degree ally pipe then silicon connector pipe onto my apexi hardpipe

thanks barney ,if im gonna fit an ally pipe into the 75mm silicon what size should that be ??

what i want to achieve is silicon pipe from the throttle body then 90 degree ally pipe then silicon connector pipe onto my apexi hardpipe

i think the hard pipe you have should be 75mm aswell ,so get a 75mm 90 degree bend.

i think the hard pipe you have should be 75mm aswell ,so get a 75mm 90 degree bend.

thanks barney

Rays the Roof was supposed to be doing a replacement pipe in alloy a few months back, but he seems to have dissapeared off the face of the earth

Rays the Roof was supposed to be doing a replacement pipe in alloy a few months back, but he seems to have dissapeared off the face of the earth

will see if i can contact him cheers

I used 76mm for mine. got a 90 bend 6inch by 6 inch had to cut 2inch off to get it to clear my shrut brace, two 76mm sil hoses then a 6 inch by 6 inch 45 bend to my air filter then heat wrapped the lot (i would add a pic but me and computers ) itcost me less than £40.

Hope this works

How do you find it without the resonator chamber?

I remember the MX5's used to loose torque without it, is the supra the same?

Cheers for all the info lads,

Gave me some good ideas ; )

Made mine more responsive to be honnest , increased the induction noise though lol.

Hope this works

sorry for the late reply .

yes that is what i want cheers mate .BTW what difference do the headers make can you notice ??? they look the dogs:)

where did you get the silicon hoses and ali pipe from ???