recommend locking nuts

Just done a brief search for recommended locking wheel nuts but to no avail, are these something I can get from Halfrauds (McGard?)

and what type will I need ? I have Rota GTRs and its a Jspec TT (if that makes a difference?)

plus I must be able to get them ASAP or 'off the shelf' as im going to manchester tomorrow for the weekend and I currently don't have any locking nuts on

Any recommendations?

Thanks

Don't go to Manchester, period.

Don't go to Manchester, period.

If you need a spare or replacement key from McGard the process is tortuous and involves going through them in Germany with all sorts of personal info. If you can buy a spare key with the nuts, do so.

So you would recommend McGard ? if so, is there a certain type I would need with my wheels?

Thanks

I am not recommending nor condemning them, a locking wheel nut is a locking wheel nut, personally i wouldn't have them as a gift, they are a total PITA, like alarms. Just buy something that fits that has back up if you lose the key or a nut.

Thanks for your replys Chris,

Does anyone know the size of the wheel bolts (m12 x 1.5 ?) or the mcgard code specific for the supra? the book in halfrauds is usless....

M12 x 1.50 pitch thread. Taper depends on what wheels you have, probably a 60 degree seat though. Stock rims use an entirely different seating nut, a tube nut and washer arrangement, if you have stock wheels the choice of locking nuts is limited.