jackso11 Posted May 10, 2010 Share Posted May 10, 2010 Going to fit a blizt dual SBC single solenoid boost controller at the weekend but only have the wiring, control unit and solenoid. What other parts do I need? There is a hard hose coming out the back that has been cut about 12" long. what kind of hose is this and where can I source it? Quote Link to comment Share on other sites More sharing options...
shima60 Posted May 10, 2010 Share Posted May 10, 2010 if i remember correctly that goes into a T piece on the turbo. here is the instruction manual for the dsbc i have the same one its a good bit of kit.... after you figure it out. lol took me a while http://www.naikontuning.com/det_tec/wp-content/uploads/2010/04/dual-sbc-spec-s.pdf Quote Link to comment Share on other sites More sharing options...
jackso11 Posted May 10, 2010 Author Share Posted May 10, 2010 the hard pipe/hose seems like a tiny diameter compared to silicone hose. must use a tiny t-piece too. is it like this one? http://cgi.ebay.co.uk/Vacuum-hose-t-piece-turbo-vacuum-gauge-blue-/390191461521?cmd=ViewItem&pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5ad9393491 Quote Link to comment Share on other sites More sharing options...
shima60 Posted May 10, 2010 Share Posted May 10, 2010 yea it is tiny and black. mine was also split so had to convert it to silicone. i'll see if i have a pic if not i'll get one for ya Quote Link to comment Share on other sites More sharing options...
shima60 Posted May 10, 2010 Share Posted May 10, 2010 here ya go just convert to silicone then. attatch to vacuum on the inlet side Quote Link to comment Share on other sites More sharing options...
jackso11 Posted May 10, 2010 Author Share Posted May 10, 2010 thanks for the pic I bought one of the hard plastic ones from ebay by mistake a while ago. Will have to dig it out and see if it is the same. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.