BlackWatch66 Posted April 13, 2010 Share Posted April 13, 2010 Have been searching the internet for hub adapters to change the Toyota 5/114,3 PCD to BMW 5/120 PCD just to see if it can be done, but cannot find anything. I was thinking of trying to fit some BBS alloys from a BMW to the Supra, So was just wondering if anyone has any ideas as to what can be done, can the alloys be filled and redrilled to the correct PCD or can I get some specially made adapters? Many thanks in advance Quote Link to comment Share on other sites More sharing options...
JustGav Posted April 13, 2010 Share Posted April 13, 2010 Which answer would you like to this?? Truthful one? Quote Link to comment Share on other sites More sharing options...
BlackWatch66 Posted April 13, 2010 Author Share Posted April 13, 2010 Which answer would you like to this?? Truthful one? LOL might as well Quote Link to comment Share on other sites More sharing options...
JustGav Posted April 13, 2010 Share Posted April 13, 2010 Then you REALLY don't want to do it Quote Link to comment Share on other sites More sharing options...
BlackWatch66 Posted April 13, 2010 Author Share Posted April 13, 2010 Then you REALLY don't want to do it But why, Sir? Quote Link to comment Share on other sites More sharing options...
JustGav Posted April 13, 2010 Share Posted April 13, 2010 (edited) But why, Sir? Filling alloys and redrilling them is just a no go, due to the most are made. They will never be the same strength or properly balanced... Hub adapters, well some may say it is an option, but I rank them up there with spacers, which at the end of the day is what they will probably be. Better off getting the right wheels, but then some people may disagree... Edited April 13, 2010 by JustGav (see edit history) Quote Link to comment Share on other sites More sharing options...
BlackWatch66 Posted April 13, 2010 Author Share Posted April 13, 2010 Ok, thanks Gav, thats all I needed to know, appreciate your quick and truthful answer. Just thought it was worth putting it out there and see what happens Quote Link to comment Share on other sites More sharing options...
Tee from China Posted April 14, 2010 Share Posted April 14, 2010 These are what you want :- http://www.performancealloys.com/alloy_wheels_adaptors.asp, only problem is the only ones with the P.C.D of 114.3 have a centre bore size of 64/67.1/70.1 and the Supra is only 60.1 plus they cost £79.00 + per pair so probably easier to find some rims with the correct P.C.D to start with Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.