911 Alloys

Hi, does anyone know if 911 alloy wheels would fit on a supra? I know this might sound a little weird but i think the 5 spoke design would look awesome on a supra.

The front wheels have Pirelli Rosso 225/40 ZR 18 N4 tyres and the rear wheels have Pirelli Rosso 235/30 ZR 18 N4 tyres. The front wheels have an offset of 8 50 and the rear wheels have an offset of 10 65. Anybody have any ideas whether these would fit?

Thanks in advance

I think the PCD is 5x130 which is wrong, as the supra is 5x114 so they won't fit

Little help for a newbie, PCD?

Little help for a newbie, PCD?

It's the measurement between each stud;)

I think you may find the centre bore different as well, 60ish for the supra and about 71 for the 911

ta muchly for the advice

I suppose it would be possible with hup adaptors and wide arches, but not really recommended.

EDIT: Shame they don't fit straight on as some 993 Turbo rims would look lush on a Supra IMO.

Pretty sure there's already been a pic on here with a Supra with 911 alloys on, looked preety good as an alternative to stock wheels TBH

There are quite a few adapter kits sold here in Germany, would have to be 25mm+ to fit on stock studs though!

I had these on my old Supra, porsche fitment 5 x 130

http://www.rh-wheels.com/index.cfm?P=wheels_detail&PID=84680

Porsche cup replicas or turbo wheels made for VAG fitment (5x112) will fit the Soop with the correct size spigot rings and vari-bolts to take up the 5x114.3 PCD on the Soop. My Last wheels where staggered VAG 5x112 fitment and fitted mine with no issues, no adaptors or porsche PCD's required

i posted that pic with the sup with 911 wheels will try and find the pic and post it up again.

I happen to have a set of 5 spoke 18" wheels that are the same as the ones on the Porsche in Bad Boys - Speedline Alesio I believe. They fit a Supra perfectly, correct offsets and everything. They have been sat in my shed for a couple of years awaiting an eager buyer