V Posted May 18, 2004 Share Posted May 18, 2004 One of the jets has got blocked on the bonnet, and looking on the under side of the bonnet it seems to be within the inner skin (I haven’t taken the insulation off yet) Can the jet be clipped/twisted off externally so that I can give it a good clean, or can you get to it from under the bonnet, although it doesn’t seem likely as said above? Many thanks Stephen V PS. had a bit of a posting spree:) Quote Link to comment Share on other sites More sharing options...
Rob Posted May 18, 2004 Share Posted May 18, 2004 There's a black rubber plug, pull it off and you can use a small screwdriver to press in the two plastic lugs on the tube below the bonnet washer. This will allow the washer to be pulled out the top of the bonnet, with the rubber hose still attached. All the above is done by "feel" alone. I can't remember if you have to remove the bonnet liner to do this. Quote Link to comment Share on other sites More sharing options...
V Posted May 18, 2004 Author Share Posted May 18, 2004 Cheers for that - should be ok, i'm used to fumbling around blind:D Cheers Stephen V Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.