hodge Posted January 29, 2010 Share Posted January 29, 2010 maybe a stupid question but can someone explain where the clutch slave cylinder located. I've just picked up my 6 speed conversion and just want to plan where stuff will go. Thanks John Quote Link to comment Share on other sites More sharing options...
Andy Blyth Posted January 29, 2010 Share Posted January 29, 2010 It's bolted with 2 bolts to the side of the bellhousing. Theres a little hole about an inch and a half in diameter around the circumference of the housing; the rod of the slave cylinder pokes through there. Quote Link to comment Share on other sites More sharing options...
hodge Posted January 29, 2010 Author Share Posted January 29, 2010 Tremondous cheers dude. Quote Link to comment Share on other sites More sharing options...
Homer Posted January 29, 2010 Share Posted January 29, 2010 Just a side note on the installation, the bracket that holds the connector line from the slave cylinder I found missing on my auto. At the moment it's hanging lose, but should ideally have a bracket welded onto the chassis. Quote Link to comment Share on other sites More sharing options...
hodge Posted January 29, 2010 Author Share Posted January 29, 2010 Cheers homer. Luckly the 1 supplies with the kit has a bracket bolted to it ready, so I'm good to go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.