The-Plethora Posted January 3, 2010 Share Posted January 3, 2010 Had a quick search but nothing obvious popped into my browser. It seems like my passenger side rear disk and pad is knackered. I thought there was a dash light or noise it would make when getting low? Bit of a pain in the arse as I spent most of the weekend making speaker brackets and fitting speakers and it was my first drive after. Am I going to have trouble getting (ideally new) rear brake disks and pads for a jap car in the UK (I read the calipers are different so presume pads are also). Its one of those jobs I was planning to do anyway as you sort of know where you are with a car you have bought then but was waiting for better weather If anyone can suggest a decent place for jap spec pads and disks online or have pads / discs they wish to sell please drop me a line. Cheers Dave Quote Link to comment Share on other sites More sharing options...
Kirk Posted January 3, 2010 Share Posted January 3, 2010 why not just order from toyota... there realy not that expensive Quote Link to comment Share on other sites More sharing options...
Kev_A Posted January 4, 2010 Share Posted January 4, 2010 Check ebay and motor factors mate. You'll not have trouble finding them. They're not in short supply. I bought my new rear discs from a motor factors for £40 for the pair and pads aren't much Quote Link to comment Share on other sites More sharing options...
Abz Posted January 4, 2010 Share Posted January 4, 2010 I went to my local car parts shop & they had my J Spec disks in stock along with pads. They said their the same as the lexus (GS300 I believe). They were cheaper than Mr T & have worked brilliantly since I put them on 6 months ago. Quote Link to comment Share on other sites More sharing options...
The-Plethora Posted January 4, 2010 Author Share Posted January 4, 2010 Cheers all, I have sent my retired folks on a mission this week. Tried Toyota world in Bristol but just got a sales monkey who couldnt forward my call. Abz what year GS300 would that be? I presume thats the UK model (makes it a bit easier to find). It's minus 5 here right now, I was really looking for something in the mid 20's to be doing this Quote Link to comment Share on other sites More sharing options...
garethr Posted January 4, 2010 Share Posted January 4, 2010 (edited) In Bristol - try Quantoc motor factors. As said above, the fronts and rears are the same as a GS300/Aristo Mk1 (JZS147) up to 1997. Fronts are the same as a GS300/Aristo Mk2 (JZS160). If possible, I'd use Toyota/Lexus or, say, Mintex pads. I wasn't too impressed with the normal "motor factor" pads on my GS, although they'd be better than nothing. Edited January 10, 2010 by garethr (see edit history) Quote Link to comment Share on other sites More sharing options...
Abz Posted January 4, 2010 Share Posted January 4, 2010 Abz what year GS300 would that be? I presume thats the UK model (makes it a bit easier to find). It's minus 5 here right now, I was really looking for something in the mid 20's to be doing this Not sure what year, I am getting the model from 1999. Though the guy at the shop had a quick look at my brake discs and noticed the shape was the same as the Lexus's & I assumed he was talking about the GS300 as they are most similar (UK Spec) also the Lexus Soarer is very similar for JSpec pads. Quote Link to comment Share on other sites More sharing options...
miko_supra Posted January 4, 2010 Share Posted January 4, 2010 There's no brake wear sensor on supras, which is why you didn't get a light or a beep. Quote Link to comment Share on other sites More sharing options...
Kirk Posted January 4, 2010 Share Posted January 4, 2010 they usualy just squeel to tell you they want replacing! Quote Link to comment Share on other sites More sharing options...
Digsy Posted January 4, 2010 Share Posted January 4, 2010 Do a search on here tp find the correct part numbers and just get your local Toyota garage to order them in. And yes, the geniune parts do have a noisemaker in them to alert you when they are getting low. It is small metal spring that contacts the disc and makes a horrible scraping sound. It comes into play at about 1mm of pad remaining. Quote Link to comment Share on other sites More sharing options...
Andy Blyth Posted January 4, 2010 Share Posted January 4, 2010 Tried Toyota world in Bristol but just got a sales monkey who couldnt forward my call. Which Toyota World was it? I've tried both North (Filton) and South (Brislington). I found Toyota World South to be loads better. For me it's a bit of a drive but worth it. Ask for Mark Davies on the parts desk. Very helpful. Quote Link to comment Share on other sites More sharing options...
The-Plethora Posted January 10, 2010 Author Share Posted January 10, 2010 What a pain, one local place thought they had the pads in but couldnt find a match, went to Toyota world and they shut at 12 on a weekend. Would someone in the know just mind confirming that these are JSpec brakes? I presume the TRD stuff is just a decal but it doesnt look 100% like what I have in the downloaded manuals from here. Fronts and back calipers are below, just dont want to waste money on the wrong type. Thanks for the help guys. Quote Link to comment Share on other sites More sharing options...
Kev.O Posted January 10, 2010 Share Posted January 10, 2010 Yes they are J-spec 2 pot fronts and 1 pot rears and the TRD is just a decal Quote Link to comment Share on other sites More sharing options...
Nic Posted January 10, 2010 Share Posted January 10, 2010 Yes they are the standard smaller (2pot front/1pot rear) j-spec brake option. What parts are you wanting exactly? Just rear discs and pads? Quote Link to comment Share on other sites More sharing options...
The-Plethora Posted January 10, 2010 Author Share Posted January 10, 2010 Thanks all makes me a bit happier. I just need rear pads Nic, sending my folks out to get some this week, looking at it all of them are lor so I will be replacing front and rears, the calipers look like they need a bit of a refurb so might get those sorted as well. I wanted to give the car a bit of a going over as soon as I got it in November but the weather has been so crappy that I have not had chance. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.