jackso11 Posted December 25, 2009 Share Posted December 25, 2009 I want to fit a polished fan shroud and rad cover, but want to keep the standard air filter. I see to fit the shroud I need to remove one of the air feeds to the filter box. What do people normally do in this situation? leave the whole in the side of the box that the feed usually connects to? route a new feed to the box? or seal this hole up as there is also a bottom feed? pics would be useful this is one of my christmas mods....along with going bpu Quote Link to comment Share on other sites More sharing options...
jackso11 Posted December 25, 2009 Author Share Posted December 25, 2009 nobody got a setup like this? Quote Link to comment Share on other sites More sharing options...
jackso11 Posted December 26, 2009 Author Share Posted December 26, 2009 can the polished bits not be fitted with the standard box? Quote Link to comment Share on other sites More sharing options...
Guest SupraGTE Posted December 26, 2009 Share Posted December 26, 2009 Hi mate , maybe best to ask to rays the roof as he does this shrouds, any picture what the fitting problem is? im almost 98% i seen pictures with chomed shroud and oe Airbox on this forum... Quote Link to comment Share on other sites More sharing options...
jackso11 Posted December 26, 2009 Author Share Posted December 26, 2009 Yeah I thought I had but after a couple of hours searching I have given up. Will ask Ray, unless he reads this first Quote Link to comment Share on other sites More sharing options...
Marco79 Posted December 28, 2009 Share Posted December 28, 2009 Hey mate yes you can as mitchell9006 has done it, I've just received mine and going to do the same Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.