Jump to content
The mkiv Supra Owners Club

2 Gauge Pillar Pod?


96sz
 Share

Recommended Posts

Fitted one 3 weeks ago. The finish is a really good match. Mine was slightly short as it finished flush with the rear panel by the top of the door. I glued two tabs to the back of it and tucked them behind the existing panel, it holds it a treat. There is also a tab on the bottom of it that sits down by the side of the dash. I filed this slightly to make it perfect, but it still fits well without going that far. I would give the quality 9/10 and 8/10 for the fit. Send Alan a message, I found him really helpful and it was taped to a wooden template for shipping so no worries about damage in the post, really pleased overall. Hope this helps.

Link to comment
Share on other sites

Fitted one 3 weeks ago. The finish is a really good match. Mine was slightly short as it finished flush with the rear panel by the top of the door. I glued two tabs to the back of it and tucked them behind the existing panel, it holds it a treat. There is also a tab on the bottom of it that sits down by the side of the dash. I filed this slightly to make it perfect, but it still fits well without going that far. I would give the quality 9/10 and 8/10 for the fit. Send Alan a message, I found him really helpful and it was taped to a wooden template for shipping so no worries about damage in the post, really pleased overall. Hope this helps.

 

Thanks mate, really helpful. It does look a good bit of kit on the ad, but just wanted to know of anyones experiences with it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.