Guest blueangel Posted November 12, 2009 Share Posted November 12, 2009 My next project is to design and fabricate some runners and mounts for aftermarket buckets seats to fit the supra. The main reason is branded runners are hugely expensive second all others seem to make you sit too high. If anyone has a set of buckets sat around could you lease tell me the make and measure the distance between mounting points please. Quote Link to comment Share on other sites More sharing options...
JamieP Posted November 12, 2009 Share Posted November 12, 2009 Mine make my seat sit to high, very interested in these, only problem i see is all buckets are different widths. Quote Link to comment Share on other sites More sharing options...
Kirk Posted November 12, 2009 Share Posted November 12, 2009 sitting high is useful for shortarses like me though subscribed! Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted November 12, 2009 Share Posted November 12, 2009 So far thou ive had 3 diff sets including the originals and the rails on all 3 have been the same width so just the mounting holes are diff but should be able to build these at different widths too. Quote Link to comment Share on other sites More sharing options...
steve spedd Posted November 12, 2009 Share Posted November 12, 2009 this could be very popular!! Quote Link to comment Share on other sites More sharing options...
jihwaan Posted November 13, 2009 Share Posted November 13, 2009 mine sit pretty low, and they werent that expensive- got em from some shop in new zealand- bout $100 each ($50 pounds to you guys)...will try nd find a link for you... But fabricating some custom ones sounds like a good idea, I know it took me months to find these ones Quote Link to comment Share on other sites More sharing options...
harley-jm Posted December 15, 2009 Share Posted December 15, 2009 Did this ever get anywhere? I need to fit some bucket seats and would love to find some side mount brackets that fit straight into the supra floorpan Quote Link to comment Share on other sites More sharing options...
dude Posted December 16, 2009 Share Posted December 16, 2009 we are getting some made by Corbeau, but they will be made to fit their seats, we will have a thread about the seats soon, they will be available with and without subframes and can be custom made,trimmed etc. Will also have some pics of the drivers carbon bucket they have made for me !!!!! Quote Link to comment Share on other sites More sharing options...
Project Blitz Posted December 16, 2009 Share Posted December 16, 2009 i'll be interested as I have a set of these http://www.sparcousa.com/productImages/195.jpg might retrim them but need runners Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.