Nic Posted October 3, 2009 Share Posted October 3, 2009 Just a new product I came across that I'd not seen before, the Blitz Piping Stopper. It's designed to brace the intercooler pipes across the joints to stop them blowing under pressure. Not really required on most decent intercooler kits where the IC pipes are swaged on the ends, but could be useful for cheaper IC kits with plain cut ends that are more susceptible to blowing. Could also be useful belt & braces product for anyone running big boost pressures. Max diameter available 80mm. Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted October 3, 2009 Share Posted October 3, 2009 It looks cool if nothing else Quote Link to comment Share on other sites More sharing options...
jevansio Posted October 3, 2009 Share Posted October 3, 2009 It looks cool if nothing else The clamps would need to be the exact dimensions of the pipework, I'd rather put 2 Mikalores on Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted October 3, 2009 Share Posted October 3, 2009 (edited) It looks cool if nothing else But not as cool as the proper things Expensive though, but they won't leak, burst or blow off. http://www.burnsstainless.com/Hardware/WigginsClamps/wigginsclamps.html They also have a good article on how tubular turbo manifolds should be made and used. http://www.burnsstainless.com/TechArticles/TurboHeaders/turboheaders.html Edited October 3, 2009 by Chris Wilson (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.