dandan Posted September 28, 2009 Share Posted September 28, 2009 (edited) Where do most people on here source their suspension parts from? I'm after a set of the aftermarket JZA80 Bilstein dampers (2x B46-1792 or AK-1242 and 2x B46-1793 or AK-1243). Four Bilstein sleeve kits (#BSN-B4BOA0000117): http://www.summitracing.com/parts/BSN-B4BOA0000117/?image=large And some good quality 2.5" ID coil springs (I haven't nailed the rates down just yet but they'll be something like an 8" 600lb/in front and a 10" 375lb/in rear) Cheers Dan Edited September 28, 2009 by dandan (see edit history) Quote Link to comment Share on other sites More sharing options...
Steve Posted September 28, 2009 Share Posted September 28, 2009 Chris Wilson may be able to help out on that Dan. Maybe worth a phone call. Quote Link to comment Share on other sites More sharing options...
hoff Posted September 28, 2009 Share Posted September 28, 2009 Yes CW will see you right. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted September 28, 2009 Share Posted September 28, 2009 (edited) I am a Bilstein agent. I can source cheap. mid range and high end springs too. I think I have the dampers in stock. Edit, I have the standard 1792 and 1793 units in stock, and I also have a set awaiting custom valving in bits ready to set up. Edited September 28, 2009 by Chris Wilson (see edit history) Quote Link to comment Share on other sites More sharing options...
dandan Posted September 29, 2009 Author Share Posted September 29, 2009 I will be in touch Chris. I'll try to get that email to you tomorrow to kick off some sort of discussion Quote Link to comment Share on other sites More sharing options...
dandan Posted September 30, 2009 Author Share Posted September 30, 2009 Chris - I just emailed you ref. my plan and parts. Thanks Dan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.