Dave Posted September 16, 2009 Share Posted September 16, 2009 i want to remove the std air intake pipe and put a nice shiny one on anyone got a linky as to where i might purchase this item . thanks Quote Link to comment Share on other sites More sharing options...
Dave Posted September 17, 2009 Author Share Posted September 17, 2009 bump Quote Link to comment Share on other sites More sharing options...
SupraD06 Posted September 17, 2009 Share Posted September 17, 2009 Hiya Mate, Have a look on here and see if thats any good to you, http://www.demon-tweeks.co.uk/products/ProductDetail.asp?cls=ROAD&pcode=GREAPSP-50 Also try contacting Envyperformance.com, they dont have any pictures for the two polished pipes they do but they might be able to help. http://envyperformance.com/index.cfm?fuseaction=category.display&category_id=27 6th and 7th item down. Also check to see if there are any companys near you who could make one up, I had Radtec do me one for £60 ( see Pic ) Quote Link to comment Share on other sites More sharing options...
Dave Posted September 18, 2009 Author Share Posted September 18, 2009 thanks supraD06 Quote Link to comment Share on other sites More sharing options...
Kirk Posted September 18, 2009 Share Posted September 18, 2009 Also try contacting Envyperformance.com, they dont have any pictures for the two polished pipes they do but they might be able to help. http://envyperformance.com/index.cfm?fuseaction=category.display&category_id=27 6th and 7th item down. Envy have been out of business for quite some time.... Quote Link to comment Share on other sites More sharing options...
SupraD06 Posted September 18, 2009 Share Posted September 18, 2009 Well excuse me mister current affairs Quote Link to comment Share on other sites More sharing options...
Kirk Posted September 18, 2009 Share Posted September 18, 2009 your welcome Quote Link to comment Share on other sites More sharing options...
SupraD06 Posted September 18, 2009 Share Posted September 18, 2009 Lol Quote Link to comment Share on other sites More sharing options...
Scott Posted September 18, 2009 Share Posted September 18, 2009 Envy have been out of business for quite some time.... They aren't out of business, the owners changed and the traders membership status was revoked. Quote Link to comment Share on other sites More sharing options...
Kirk Posted September 18, 2009 Share Posted September 18, 2009 i was under the impression envy was gone for good Quote Link to comment Share on other sites More sharing options...
Scott Posted September 18, 2009 Share Posted September 18, 2009 i was under the impression envy was gone for good What gave that impression? The fact that the website still works tells me otherwise but i haven't read anything since all the hassle previously. Quote Link to comment Share on other sites More sharing options...
Kirk Posted September 18, 2009 Share Posted September 18, 2009 cant say i have either, but ive seen websites left running even after the company went bust odly.. meh who knows Quote Link to comment Share on other sites More sharing options...
JayRZ93 Posted December 11, 2012 Share Posted December 11, 2012 i want to remove the std air intake pipe and put a nice shiny one on anyone got a linky as to where i might purchase this item . thanks Dave did you ever do this? Where can I get this pipe to add to my Apexi setup? http://imageshack.us/a/img20/3486/apexi.th.jpg Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 11, 2012 Share Posted December 11, 2012 You want to change the black plastic bit so it's *ALL* metal? That won't work, you have an air filter bolted to the bodyshell, and no flex in the pipe, yet the engine is rocking on its rubber mountings. Something will have to give, and it it won't be the engine no longer rocking on its mountings. For just this same reason alloy top rad pipes with short bits of silicone connector hose are a REALLY bad idea, as the rocking engine puts big loads into the plastic top tank of the radiator. Quote Link to comment Share on other sites More sharing options...
Monkpower Posted December 11, 2012 Share Posted December 11, 2012 This is what I did. . Got the parts off ebay. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.