injector help

still having a little trouble trying to find these so if anyone can help im looking for 650 or 750 jspec drop ins,if anyone knows the best place and price to get them that would be great.thanks

Got mine here mate

http://www.rhdjapan.com/jdm-low/SARD-650cc-Fuel-Injector-1JZ-GTE-2JZ-GTE-Supra-10361

Nengun and rhdjapan sites seem to be the cheapest at around £369 + postage and tax for the budget SARD ones.

I couldn't find any lower than that (but plenty at a lot more!)

As mentioned, just make sure you get them flow tested prior to install and provided that and the spray pattern are okay you're good to go.

Did you ever hear Ryan's recommendation on the size? If you're planing a single install later on then you might be better off going for a 720 or 800cc injector rather than a 650. The only concern is whether the EMU can handle those levels of correction and injector lag (1.6ms I think)

Nengun and rhdjapan sites seem to be the cheapest at around £369 + postage and tax for the budget SARD ones.

 

I couldn't find any lower than that (but plenty at a lot more!)

 

As mentioned, just make sure you get them flow tested prior to install and provided that and the spray pattern are okay you're good to go.

 

Did you ever hear Ryan's recommendation on the size? If you're planing a single install later on then you might be better off going for a 720 or 800cc injector rather than a 650. The only concern is whether the EMU can handle those levels of correction and injector lag (1.6ms I think)

well, my EMB (yes, you read correct, I have an Emanage Manage Blue!) handles my 720's fine