Which Injectors are a direct bolt-on ?

[Supera]

Which injector is recommended for the J.spec Supra w/o upgrading fuel rails etc...?

Please give me some names for 550cc, 600cc and 660cc.

And what type does the stock come as ? Top/Side Feed ? Low/High inpedance?

What is required to get, let's say SP Fuel system to work on a J.Spec Supra ?

[MONKEYmark]

Originally posted by Supera
Which injector is recommended for the J.spec Supra w/o upgrading fuel rails etc...?

Please give me some names for 550cc, 600cc and 660cc.

And what type does the stock come as ? Top/Side Feed ? Low/High inpedance?

What is required to get, let's say SP Fuel system to work on a J.Spec Supra ?

as far as i know

JAP injectors are high impedence side feed (no resistor pack needed)


UK/US injectors are low impedence side feed, you also need the resistor pack

if you want to run low impedence injectors on a JAP car you need to buy a resistor pack. i want to go with just drop in injectors for stock rail. a few of the traders sell injectors that drop straight into JAP rail. bigger than 550cc

a lot of info is out there if you use search button. always good to get feedback though.

[stt]

There are some out there,try sending an E-mail to this company and see what names they can give you,

http://www.hyeline.com

[Supera]

Thanx Guys!

Monkeym:
Now that you gave me the top/side feed + high/low imp I'll start searching :D :thumbs: