Blackie Posted May 3, 2009 Share Posted May 3, 2009 Just jet washed my engine (First time in 4 years) and its miss fireing. I sprayed wd in to all the connectors i have found but its still doing it but not so bad. Will it dry its self out in due course? Quote Link to comment Share on other sites More sharing options...
tony tt Posted May 3, 2009 Share Posted May 3, 2009 It should do can you leave it running and let the heat maybe dry it out? Quote Link to comment Share on other sites More sharing options...
TRACIE_LOU Posted May 3, 2009 Share Posted May 3, 2009 did you cover up electrics with little bags or give them any protection Quote Link to comment Share on other sites More sharing options...
pistonbroke Posted May 3, 2009 Share Posted May 3, 2009 Your dizzy cap will need drying out. Quote Link to comment Share on other sites More sharing options...
Dave Posted May 3, 2009 Share Posted May 3, 2009 ive jetwashed loads of engines --take the dizzy apart and dry it out that should sort it Quote Link to comment Share on other sites More sharing options...
JustGav Posted May 3, 2009 Share Posted May 3, 2009 NA per chance? You probably find water has dropped into the gulley by the plugs, it doesn't really dry out.. you need to get an airline in there and blow the majority out. Quote Link to comment Share on other sites More sharing options...
Dave Posted May 3, 2009 Share Posted May 3, 2009 NA per chance? You probably find water has dropped into the gulley by the plugs, it doesn't really dry out.. you need to get an airline in there and blow the majority out. ahhh! didnt think of that one Quote Link to comment Share on other sites More sharing options...
JustGav Posted May 3, 2009 Share Posted May 3, 2009 ahhh! didnt think of that one Most common one, it usually just collects there and misfires (from experience a few times ) The dizzy usually stays fairly dry. Quote Link to comment Share on other sites More sharing options...
Blackie Posted May 3, 2009 Author Share Posted May 3, 2009 NA per chance? You probably find water has dropped into the gulley by the plugs, it doesn't really dry out.. you need to get an airline in there and blow the majority out. So where would i stick the air line? Where the leads go in? Have i got to take anything off? Quote Link to comment Share on other sites More sharing options...
JustGav Posted May 3, 2009 Share Posted May 3, 2009 As you look at the engine, between the two cams... Erm, you sort of need to take the inlet section that runs over the top of the engine off to get access. Not overly difficult, couple of bolts. There is an addition plate that sits in the gulley that you will have to remove, and then start blasting Quote Link to comment Share on other sites More sharing options...
Blackie Posted May 3, 2009 Author Share Posted May 3, 2009 As you look at the engine, between the two cams... REEEAAALLLYYYYY Erm, you sort of need to take the inlet section that runs over the top of the engine off to get access. Not overly difficult, couple of bolts. There is an addition plate that sits in the gulley that you will have to remove, and then start blasting Bugger, Its more work than i wanted to do but i suppose i have too. Cheers Quote Link to comment Share on other sites More sharing options...
AndyT Posted May 3, 2009 Share Posted May 3, 2009 This'll teach you. Follow JustGavs advice and you're car will be back to it's former glory. Quote Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted May 3, 2009 Share Posted May 3, 2009 NA per chance? You probably find water has dropped into the gulley by the plugs, it doesn't really dry out.. you need to get an airline in there and blow the majority out. this is what happened to mine . Quote Link to comment Share on other sites More sharing options...
pjavon Posted May 3, 2009 Share Posted May 3, 2009 and mine, centre 2 plugs were were full of water Quote Link to comment Share on other sites More sharing options...
Mike Posted May 3, 2009 Share Posted May 3, 2009 http://www.performance-oils.co.uk/acatalog/ultra.jpg + http://www.naturalcollection.com/images/newproducts/12414-00.jpg = Clean Engine bay Step away from the jet washer you loon! Quote Link to comment Share on other sites More sharing options...
buster Posted May 3, 2009 Share Posted May 3, 2009 nice to see you have cleaned ya engine mate was starting to look very taty shame ya mucked it up at the same time lol you still popin down for that boss? Quote Link to comment Share on other sites More sharing options...
AndyT Posted May 3, 2009 Share Posted May 3, 2009 boss? Karolina then. Quote Link to comment Share on other sites More sharing options...
buster Posted May 3, 2009 Share Posted May 3, 2009 :plmao Quote Link to comment Share on other sites More sharing options...
bignum Posted May 3, 2009 Share Posted May 3, 2009 The last thing i`d do with any engine is jetwash it, even a diesel;) Quote Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted May 3, 2009 Share Posted May 3, 2009 NA per chance? You probably find water has dropped into the gulley by the plugs, it doesn't really dry out.. you need to get an airline in there and blow the majority out. As above. Quote Link to comment Share on other sites More sharing options...
Blackie Posted May 3, 2009 Author Share Posted May 3, 2009 Just had it all apart, What an effort. Each of the plug holes was filled with water. NEVER JETWASH AN ENGINE Quote Link to comment Share on other sites More sharing options...
JustGav Posted May 3, 2009 Share Posted May 3, 2009 Just had it all apart, What an effort. Each of the plug holes was filled with water. NEVER JETWASH AN ENGINE And the lesson is learnt Quote Link to comment Share on other sites More sharing options...
ilicos Posted May 3, 2009 Share Posted May 3, 2009 I took my car on a 2 hour drive and that sorted it. Quote Link to comment Share on other sites More sharing options...
NeoFuture Posted May 3, 2009 Share Posted May 3, 2009 i dont really care what my engine looks like yet, its hidden from view its an NA, when i get a transplant ill remeber this for when i do clean it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.