mplavery Posted April 29, 2009 Share Posted April 29, 2009 Hi people Does any one know where i can get some blue wheel bolts? Think they will look good on my works wheels and my car is getting sprayed blue too Also i have 18s on mine and was thinking of having 5mm spacers just to bring them out a little, Im guessing i dont have to have extended wheel bolts for 5mm Has anyone else done the same with there wheels and if so have you run into any problems Thanks for your time Quote Link to comment Share on other sites More sharing options...
Nic Posted April 29, 2009 Share Posted April 29, 2009 I'd personally advise against fitting a spacer, the wheel should be supported/centred on the centre spigot on the hub, if it's not all the support will be on the wheel studs. I can supply various blue wheel nuts, drop me a pm if you'd like details. Which Work wheels do you have, do they take standard wheel nut fitment? Lightweight Weds Wheel Nuts http://img115.imageshack.us/img115/6981/p1020430.jpg http://img259.imageshack.us/img259/8597/p1020426.jpg Rays Wheel Nuts http://www.rayswheels.co.jp/2007/products/rg/rock01.jpg http://www.rayswheels.co.jp/2007/products/rg/rock02.jpg Quote Link to comment Share on other sites More sharing options...
mplavery Posted April 29, 2009 Author Share Posted April 29, 2009 I'd personally advise against fitting a spacer, the wheel should be supported/centred on the centre spigot on the hub, if it's not all the support will be on the wheel studs. I can supply various blue wheel nuts, drop me a pm if you'd like details. Which Work wheels do you have, do they take standard wheel nut fitment? Lightweight Weds Wheel Nuts http://img115.imageshack.us/img115/6981/p1020430.jpg http://img259.imageshack.us/img259/8597/p1020426.jpg Rays Wheel Nuts http://www.rayswheels.co.jp/2007/products/rg/rock01.jpg http://www.rayswheels.co.jp/2007/products/rg/rock02.jpg Thanks for the advise, maybe i will leave the spacers then ooo they look nice wheel bolts, pm ya now with the details nic Quote Link to comment Share on other sites More sharing options...
flyby Posted September 12, 2009 Share Posted September 12, 2009 How dose thay look like when thay are for volk VA3 whels? I try some Slime line nuts, but thay do not fit. Are the spec. nuts for all VOLK rims ? Quote Link to comment Share on other sites More sharing options...
mustang Posted September 12, 2009 Share Posted September 12, 2009 I was thinking about the same, make the wheels look a little more agressive on the offsets. There are quite a few people on here using spacers and up to 10mm I dont see that there would be a problem, Im no expert though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.