View Full Version : OIL coolers engine & transmission
MONKEYmark
17-03-04, 02:09
hi just surfing around and found these oil coolers
oil cooler for engine oil heavy duty. they are made by FLEX-A-LITE
the people who make fans for radiators.
ENG OIL COOLER UNI HI-PER
HEAVY DUTY COOLER KITS INCLUDES ALL THE HOSES,FITTINGS,CLAMPS AND FLEXALITE'S PROPRIETARY SANDWHICH ADAPTERS.
they seem good value for the money, the blitz oil coolers are silly money.
have wrote to them asking about shipping. they come with or without AN fittings
MONKEYmark
17-03-04, 02:12
this is the tranny cooler. have wrote to them about getting 2 for car.
what do you think any good?
thought i would try them as it has to be better than nothing. i have a B&M tranny cooler on car now.
Dragonball
17-03-04, 07:33
We have been selling these for ages ya daft banana!
Tried and tested on loads of cars now
:phttp://www.mpaconsultancy.co.uk/miamirice/images/Oil%20Trans%20Relocation%20Kit.jpg
Fittings are really key
fitted to mine and no more problems.....its a must on anybody's shopping list
Phil the fixer
17-03-04, 23:07
Yep, Pauls stacked plate coolers are the ones to get and a lot more efficient than the tube and fin type.
Cheers
Phil
MONKEYmark
17-03-04, 23:33
have just orderd 2x tranny coolers and an engine oil cooler with an fittings. they work out cheap. they just need to verify card with it been an international order.
they need a fax of my statement to prove its nothing dodgy
some of the prices over here are silly. was looking at fluidine rads seen them for £450+ here in america they about £260+ shipping.
the blitz oil coolers are mad for what they are.
also the flexalite fans are expensive too
Mark just a word of warning, make sure if you fit the cooler all those jubilee clips are VERY securely attached. I nearly killed myself when a (circlip) hose connector on a Greddy oil cooler failed, causing the oil to pump out, the big end to seize and the car to spin on a corner at 60mph. I got the cooler replaced with an HKS one which uses threaded connectors to attach the hoses to the cooler.
Having gone through what I did I personally would be very worried about those jubilee clips, just my opinion though.
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.