Wez Posted April 5, 2009 Share Posted April 5, 2009 Hey All, Following on from the thread about water flow and what can be blocked off I need to find some rubber caps, anyone know where I can get some. http://www.mkivsupra.net/vbb/showthread.php?t=181315 From memory the matrix feed at the back of the head is 17mm Quote Link to comment Share on other sites More sharing options...
Nic Posted April 5, 2009 Share Posted April 5, 2009 Hi Wes GReddy do these in various sizes. http://www.trust-power.com/14others/images/g_cap.jpg http://img10.imageshack.us/img10/714/picture1ils.jpg cheers Quote Link to comment Share on other sites More sharing options...
Wez Posted April 5, 2009 Author Share Posted April 5, 2009 Nice find Do they come in black or only blue? Quote Link to comment Share on other sites More sharing options...
Nic Posted April 5, 2009 Share Posted April 5, 2009 I *think* only blue, I'm pretty sure HKS do them in black but need to check. Quote Link to comment Share on other sites More sharing options...
hadyn Posted April 5, 2009 Share Posted April 5, 2009 How much Nic? I'd love those to finish off my job off blocking off the heater matrix pipes Quote Link to comment Share on other sites More sharing options...
Scott Posted April 5, 2009 Share Posted April 5, 2009 I'm looking for something similar to block off the BOV recirc pipe. Quote Link to comment Share on other sites More sharing options...
Wez Posted April 6, 2009 Author Share Posted April 6, 2009 Nic, did you manage to dig out anymore info on this today? Quote Link to comment Share on other sites More sharing options...
pete_TT Posted April 6, 2009 Share Posted April 6, 2009 http://garagewhifbitz.co.uk/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=8325&category_id=2315&option=com_virtuemart&Itemid=53&vmcchk=1&Itemid=53 Quote Link to comment Share on other sites More sharing options...
Paul Whiffin Posted April 6, 2009 Share Posted April 6, 2009 I keep these in black, I'll check tomorrow to see what sizes I have in stock. Quote Link to comment Share on other sites More sharing options...
Wez Posted April 6, 2009 Author Share Posted April 6, 2009 I keep these in black, I'll check tomorrow to see what sizes I have in stock. Quote Link to comment Share on other sites More sharing options...
Nic Posted April 7, 2009 Share Posted April 7, 2009 Nic, did you manage to dig out anymore info on this today? HKS Rubber Caps http://img18.imageshack.us/img18/5531/picture1nhl.jpg http://www.hks-power.co.jp/db/product/276/276-1.JPG Quote Link to comment Share on other sites More sharing options...
Wez Posted April 8, 2009 Author Share Posted April 8, 2009 Does anyone have easy access to an engine/head that can measure what size caps are required for the following connections :- 1. Matrix Feed/Head Exit : 17mm (i think) 2. Matrix Return : ???? 3. Stock Turbo Return x2 : ???? Thanks Quote Link to comment Share on other sites More sharing options...
Paul Whiffin Posted April 8, 2009 Share Posted April 8, 2009 (edited) Does anyone have easy access to an engine/head that can measure what size caps are required for the following connections :- 1. Matrix Feed/Head Exit : 17mm (i think) 2. Matrix Return : ???? 3. Stock Turbo Return x2 : ???? Thanks 1. 17mm £2.50 + VAT 2. 17mm £2.50 + VAT 3. Where do you mean, on to the water pump housing? If so 10mm £2 each + VAT Ta Edited April 8, 2009 by Paul Whiffin (see edit history) Quote Link to comment Share on other sites More sharing options...
Wez Posted April 8, 2009 Author Share Posted April 8, 2009 3. Where do you mean, on to the water pump housing? If so 10mm £2 each + VAT I think so, it comes out at an angle about a foot below the water elbow, the other end is at the back near the firewall, at the moment i have these two connected together with a rubber hose supplied with my turbo kit. Quote Link to comment Share on other sites More sharing options...
Scott Posted April 8, 2009 Share Posted April 8, 2009 1. 17mm £2.50 + VAT 2. 17mm £2.50 + VAT 3. Where do you mean, on to the water pump housing? If so 10mm £2 each + VAT Ta Paul do you have any 19mm in black? Quote Link to comment Share on other sites More sharing options...
Wez Posted April 8, 2009 Author Share Posted April 8, 2009 1. 17mm £2.50 + VAT 2. 17mm £2.50 + VAT 3. Where do you mean, on to the water pump housing? If so 10mm £2 each + VAT Ta Are those prices each as they are sold in pairs arent they? Quote Link to comment Share on other sites More sharing options...
Paul Whiffin Posted April 8, 2009 Share Posted April 8, 2009 Paul do you have any 19mm in black? Yes. £3.50 + VAT each. Quote Link to comment Share on other sites More sharing options...
Paul Whiffin Posted April 8, 2009 Share Posted April 8, 2009 Are those prices each as they are sold in pairs arent they? I sell them seperately. I buy them in batches of 10 in the UK. Quote Link to comment Share on other sites More sharing options...
Wez Posted April 8, 2009 Author Share Posted April 8, 2009 I sell them seperately. I buy them in batches of 10 in the UK. I see, in that case I will take 2 x 17mm and 2 x 10mm, can you supply the clips to hold them on Quote Link to comment Share on other sites More sharing options...
Paul Whiffin Posted April 8, 2009 Share Posted April 8, 2009 I see, in that case I will take 2 x 17mm and 2 x 10mm, can you supply the clips to hold them on Can you pm/email me an order. Ta Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.