T67supra Posted April 5, 2009 Share Posted April 5, 2009 what do you guys reckon???? Am no body shop specialist or anything and this is my first time using filler and fibre glass so go easy on me;) I was sick and tired of the pillar pods so i have gone for this look. Believe Jay on this forum has done this but with six gauges. Will keep the update going when i have sprayed all the dash panels and fitted back together:d Quote Link to comment Share on other sites More sharing options...
JamieP Posted April 5, 2009 Share Posted April 5, 2009 Where are you putting your headunit or is this a track car? Quote Link to comment Share on other sites More sharing options...
Homer Posted April 5, 2009 Share Posted April 5, 2009 Seems okay, but they're not exactly line of sight. Before you spray make sure the finish is absolutely flat, even the tiniest mark will be very visible after painting. Use the primer layer to work out any rough points. Did you mean to sand the buttons down too?! They are easy to remove Quote Link to comment Share on other sites More sharing options...
johnny g Posted April 5, 2009 Share Posted April 5, 2009 (edited) This is Jay's install ... superb it is. http://mkivsupra.net/vbb/showthread.php?t=108601 http://mkivsupra.net/vbb/showthread.php?t=158115 Edited April 5, 2009 by johnny g (see edit history) Quote Link to comment Share on other sites More sharing options...
SUPRALOOPY Posted April 5, 2009 Share Posted April 5, 2009 I hope you are going to remove all the rubber stuff. Quote Link to comment Share on other sites More sharing options...
T67supra Posted April 5, 2009 Author Share Posted April 5, 2009 Where are you putting your headunit or is this a track car? dont need the stereo, it is getting stripped for the strip. But may try and find a alternative place for it for when it is a daily driver... Quote Link to comment Share on other sites More sharing options...
T67supra Posted April 5, 2009 Author Share Posted April 5, 2009 Seems okay, but they're not exactly line of sight. Before you spray make sure the finish is absolutely flat, even the tiniest mark will be very visible after painting. Use the primer layer to work out any rough points. Did you mean to sand the buttons down too?! They are easy to remove it is a bit of filler on the button but it scrapes off easy enough. I am going to remove all the buttons etc for spraying;) Quote Link to comment Share on other sites More sharing options...
T67supra Posted April 5, 2009 Author Share Posted April 5, 2009 I hope you are going to remove all the rubber stuff. all the rubber is scrapped off already, it is gloss black, am going to tone it down a little:) Quote Link to comment Share on other sites More sharing options...
PORNSTARRACING Posted April 5, 2009 Share Posted April 5, 2009 I hope you are going to remove all the rubber stuff. i thought exactly the same as soon as i saw it, if its not stripped, its going to have lots of crinkles becuase the filler wont blend into the rubber withoout leaving deep scratches in the surrounding rubber Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.