steady_dave Posted April 4, 2009 Share Posted April 4, 2009 I've recently been looking for a nice set of 18" Alloys for my NA (not too fond of the standard 16's with tracter tires) I've found a set of nice Wolfrace Shark's in Gunmetal with staggard witment (8.5 & 9.5) but it says they are for a MKIII Supra fitment. I've been onto a few websites where you can choose your make and model and it finds alloys that would fit that car. All the ones that you could choose the MKIV have removed that option and now have MKIII. Just wondering, how different is the fitment from the MKIV and the MKIII? Quote Link to comment Share on other sites More sharing options...
Nic Posted April 4, 2009 Share Posted April 4, 2009 What is the offset and PCD (the bolt hole size) of the wheels? Offsets need to be between +50 to +30, PCD 5 x 114.3 Quote Link to comment Share on other sites More sharing options...
steady_dave Posted April 4, 2009 Author Share Posted April 4, 2009 They're 5x114 Offset +35 Hope this helps! Quote Link to comment Share on other sites More sharing options...
Nic Posted April 4, 2009 Share Posted April 4, 2009 They should fit then, what you need to make sure of though is that they will clear the brake calipers, this is only usually a problem if you have the larger 4 pot calipers fitted on the front. Quote Link to comment Share on other sites More sharing options...
steady_dave Posted April 4, 2009 Author Share Posted April 4, 2009 They should fit then, what you need to make sure of though is that they will clear the brake calipers, this is only usually a problem if you have the larger 4 pot calipers fitted on the front. I have an NA, i'm sure it'll be fine. Thank you very much for the help! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.