chp03bcd Posted March 26, 2009 Share Posted March 26, 2009 (edited) My Supra is lowered on Eibach springs and i am very interested in buying these wheels http://www.mkivsupra.net/vbb/showthread.php?t=156009 They are Antera 309 18" with Bridgestone RE050A 275/35 rears and 245/40 fronts. I wanted to know whether anyone could shed any light on whether the wheels would fit without any modification needed. I am bit concerned about having to get the arches rolled. The seller has been very helpful with all my questions but i dont want to pester him too much with all my newbie questions. Anyone have any thoughts/suggestions? Cheers Edited March 26, 2009 by chp03bcd Linky (see edit history) Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted March 26, 2009 Share Posted March 26, 2009 It won't be the fact they are 18's that is the problem, it will be the offset:Pling: Quote Link to comment Share on other sites More sharing options...
hoff Posted March 26, 2009 Share Posted March 26, 2009 Offset dependent you should be ok. But it does depend on the offset as if this is to much it would push the wheel out a bit far in which case it may rub the arches. By the way the link doesn't work:D Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted March 26, 2009 Share Posted March 26, 2009 Also just noticed 275's, which are slightly wider than standard, so will reduce your chances of clearance. O and delete the brackets off your web link and it will work;) Quote Link to comment Share on other sites More sharing options...
chp03bcd Posted March 26, 2009 Author Share Posted March 26, 2009 Not sure of the offset, have asked the seller and am waiting to hear back. He did say that Antera only made one size for the Supra, so does anyone else know what that might be? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.