trinitom Posted March 26, 2009 Share Posted March 26, 2009 Hi people when i rev my car to 3000 rpm (car not moving) for about 15 sec the engine management light and center warning light comes up! any one add something similar or know the cause for that? thanks.. Quote Link to comment Share on other sites More sharing options...
jamesmark Posted March 26, 2009 Share Posted March 26, 2009 Have you checked your error codes yet? To see what is stored. Quote Link to comment Share on other sites More sharing options...
markylee Posted March 26, 2009 Share Posted March 26, 2009 my engine light comes on at 3000 too , moving or not, i was told it was caused by after market induction kit , had the car 3 yrs and had no real problems, Quote Link to comment Share on other sites More sharing options...
trinitom Posted March 26, 2009 Author Share Posted March 26, 2009 Have you checked your error codes yet? To see what is stored. yes just checked now, i thing i got tow codes 31 and 42 any help on code 31 please? it blink 3 times small pause and blink one time more, long pause. then 4 blinks small pause and 2 blinks, long pause and start again 3 blink etc etc..... Quote Link to comment Share on other sites More sharing options...
jamesmark Posted March 26, 2009 Share Posted March 26, 2009 31 is air flow meter. error codes http://www.mkivsupra.net/vbb/attachment.php?attachmentid=13922&d=1112558346 Quote Link to comment Share on other sites More sharing options...
trinitom Posted March 26, 2009 Author Share Posted March 26, 2009 31 is air flow meter. error codes http://www.mkivsupra.net/vbb/attachment.php?attachmentid=13922&d=1112558346 i had a look on that already , but i don't know what is this flow meter and here is located. what is the cause for that? Quote Link to comment Share on other sites More sharing options...
Dave Posted March 26, 2009 Share Posted March 26, 2009 42 is speed sensor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.