pjavon Posted March 4, 2009 Share Posted March 4, 2009 I'm going to get some glass headlights for my Supra but i'm not sure if the glass ones and j-spec bulbs are different. Does anyone know if these will fit glass headlights? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=180303740292 Thanks for any help Paul Quote Link to comment Share on other sites More sharing options...
Supranature Posted March 4, 2009 Share Posted March 4, 2009 http://www.mkivsupra.net/vbb/showthread.php?t=142251 Quote Link to comment Share on other sites More sharing options...
pjavon Posted March 4, 2009 Author Share Posted March 4, 2009 (edited) So glass headlights will fit the different types so i can't go wrong:innocent: I hope! Edited March 4, 2009 by pjavon (see edit history) Quote Link to comment Share on other sites More sharing options...
Supranature Posted March 4, 2009 Share Posted March 4, 2009 Link shows H3 and H4 bulbs, which is what glass (UK) lights require. If I were you I would save my money towards a "proper" HID kit for the low beam. It has been stated on this forum on numerous occassions that the fitting of such is the best quick improvement of the Supra. Do a search "HID". Quote Link to comment Share on other sites More sharing options...
pjavon Posted March 5, 2009 Author Share Posted March 5, 2009 Thanks for the help, think i will look into HID Quote Link to comment Share on other sites More sharing options...
Nic Posted March 5, 2009 Share Posted March 5, 2009 Link shows H3 and H4 bulbs, which is what glass (UK) lights require. HB3 and HB4 Quote Link to comment Share on other sites More sharing options...
danger_supe Posted November 23, 2009 Share Posted November 23, 2009 hey, thought i would use this old thread to ask a related question....when it comes to fitting these bulbs, i have a fog light bulb to replace and i thought it would be a 5 min job, i got the back cap off to reveal the tail, but couldnt get in any further to access the bulb, does the complete headlight unit need to come out completely to replace bulbs? or am i just not trying had enough - do i just need to fiddle about in there until i can get the blown bulb out?i see its got a metal base so it should just twist out right? cheers Quote Link to comment Share on other sites More sharing options...
SimonT Posted November 23, 2009 Share Posted November 23, 2009 Its a little bit of a pain as i recently changed one of my fogs for the MOT and it just unscrews but you need strong fingers and tiny hands to get into the space! Well i did anyway as my battery was in the way and i couldnt be bothered to remove it although it would have been alot easier!! Quote Link to comment Share on other sites More sharing options...
danger_supe Posted November 23, 2009 Share Posted November 23, 2009 Its a little bit of a pain as i recently changed one of my fogs for the MOT and it just unscrews but you need strong fingers and tiny hands to get into the space! Well i did anyway as my battery was in the way and i couldnt be bothered to remove it although it would have been alot easier!! good lad thanks man, i just wanted to double check i mean i only seem to get time at the weekends what with hardly any day light anymore, no chance during the week after work. thanks ofr the tip about the battery i may very well end up doin that! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.