x-overs

[richy2jz-gte]

wheres the best place 2 mount my x-overs for my front components. and is it easy 2 run new speaker wires into my doors.

[SimonB]

I put mine under the centre armrest, there was loads of room down there. I didn't run new wires to the doors - it would be a nightmare to figure out how to get them through the grommit. I just intercepted the speaker wires from the back of the stereo and routed these to the woofer output on the xover, then ran some new cable from the stereo speaker output to the xover input. My stock tweeters I dosconnected and removed. HTH.

[@lpher]

Its a bit of a pain to get a set of much better, and therefore thicker, high quality speakercable into the doors yes...even more timeconsuming than changing out the original tweeters ;)

@lpher