Cerikbok Posted January 22, 2009 Share Posted January 22, 2009 So my local Halfords was out of PlasticX today so I picked up some ScratchX to try and take the yellow off my headlamps, I have used PlasticX before with great results but I believe the ScratchX will be too gentle to remove it, thoughts? Quote Link to comment Share on other sites More sharing options...
aido Posted January 22, 2009 Share Posted January 22, 2009 I use Brasso on my headlights to get rid of the yellowing with age - assume it would work on the Supra too? Quote Link to comment Share on other sites More sharing options...
SteveR Posted January 22, 2009 Share Posted January 22, 2009 I used Brasso on my previous Supra. Quote Link to comment Share on other sites More sharing options...
Stan Posted January 22, 2009 Share Posted January 22, 2009 I would have thought ScratchX would have more cutting ability than PlastX, but I haven't got my cutting grade charts to hand Either way, if you end up with more swirls after removing the haze, use a fine polish to buff those swirls out Quote Link to comment Share on other sites More sharing options...
Guest david Posted January 22, 2009 Share Posted January 22, 2009 i use t cut on my headlamps works fine Quote Link to comment Share on other sites More sharing options...
Cerikbok Posted January 22, 2009 Author Share Posted January 22, 2009 Good to hear, I bought some T-Cut today Thanks for the help as always guys! Quote Link to comment Share on other sites More sharing options...
dr_jekyll Posted January 22, 2009 Share Posted January 22, 2009 frekla g3 dose a great job Quote Link to comment Share on other sites More sharing options...
magictorch Posted January 22, 2009 Share Posted January 22, 2009 frekla g3 dose a great job Yep, i use G3 as well:) T-cut and plasticx, scratchx,etc all work fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.