meph137 Posted January 17, 2009 Share Posted January 17, 2009 Does anyone know if the small 10mm bolt that holds the top of the seatbelt in place is in any way special? Mines has sheared so I'm just gonna replace it with another but didnt know if they had to be special bolts at all.. they dont look it... plus, are there any torque specs fr bolts such as these? Never seen any and I'm wondering if I tightened it too much (doubtful, I was only doing it by hand) or if the bolt was just crap. cheers! Quote Link to comment Share on other sites More sharing options...
meph137 Posted January 17, 2009 Author Share Posted January 17, 2009 ah well, just got a set of halfords bolts, one of them fits fine ubt will replace as soon as poss Quote Link to comment Share on other sites More sharing options...
merckx Posted January 17, 2009 Share Posted January 17, 2009 The grade of bolt should be marked on the head. I wouldn't normally torque them up, they don't need to be very tight. Are there any locking washers used? Quote Link to comment Share on other sites More sharing options...
JS2004 Posted January 25, 2010 Share Posted January 25, 2010 (edited) nm Edited January 25, 2010 by JS2004 (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.