kslb Posted December 8, 2008 Share Posted December 8, 2008 My father has 10 point star type screws that hold his OZ split rims together on his supe and asked if I knew where to get the tool to tighten them as one of his is leaking. Any ideas? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 8, 2008 Share Posted December 8, 2008 If you find people who raced in the Tuscan Challenge there were knock off OZ bolt sockets going around then. I *THINK* someone once told me that a Torx socket will work, too. Change them for stainless cap heads when you rebuild them Quote Link to comment Share on other sites More sharing options...
Guest Garfy Posted December 8, 2008 Share Posted December 8, 2008 Torx sockets will work, thats what I used when I rebuilt my Work Wheels Quote Link to comment Share on other sites More sharing options...
kslb Posted December 8, 2008 Author Share Posted December 8, 2008 Thanks guys I will pass it on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.