Nice nitrous install

Hey All,

Just come across this really nice nitrous install

http://www.supraforums.com/forum/showthread.php?t=516185

Prices on the manifold

---------------------

Manifold for road/track use £740

Fuel rail £125

90 mm throttle body under 800 hp £210

102 mm throttle body over 800hp £225

All prices are plus delivery and vat and import tax.

Added the pics from the thread

http://www.hypertune.net/images/race1.jpg

http://www.hypertune.net/images/race2jinside.jpg

http://www.hypertune.net/images/race2side.jpg

http://www.hypertune.net/images/race2side2.jpg

Titan/NX direct port kit

Using twin distribution rails, our nitrous kit give the supra a really trick look. come with billet mounting tabs (must be welded) and everything else needed.

Look good but you gotta be careful!

Those crazy yanks are way ahead

That's a really nice set up.

That intake manifold supports 18 fuel injectors, 6 on the top like stock and then 12 on the underside, then on top you also have the direct port nitrous

How cool is that! Talk about a dream come true!

Pics added to first post

work of art

now thats nice

Stunning!

Th

i would lick that engine look at how clean that is lol

Very nice setup, looks like my engine

Cheers! Its going to take ages to clean that up...

forgeting about the nozzzzz for a minute that is some lovely machining on the manifold and the intake tubes, someone must have spent a while setting that CNC up, impressive, not sure about the intake venturies didn't someone do a shoot out in the States with the virtuall works manifold (and another one that escapes me) and the one without the venturies made more power

Perhaps a silly question, but are those welds on the manifold done by man or machine?

Thats the same nitrous setup I have for my car, Only difference is that I've had the Virtual Works manifold machined to accept 2x -12AN PHR fuel rails, and the Titan DP Nitrous on top.

Flow should be greater on the VWR than the Ross unit. And the PHR rails are laso much bigger.

Perhaps a silly question, but are those welds on the manifold done by man or machine?

for the kind of volumes they will knock out i doubt very much it would be worth setting up a robot to do the welding, a good welder experienced with ally can easily achieve that finish

Perhaps a silly question, but are those welds on the manifold done by man or machine?

for the kind of volumes they will knock out i doubt very much it would be worth setting up a robot to do the welding, a good welder experienced with ally can easily achieve that finish

Johnd-mkiv on here welds like that

Also added this to the first post

Prices on the manifold

---------------------

Manifold for road/track use £740

Fuel rail £125

90 mm throttle body under 800 hp £210

102 mm throttle body over 800hp £225

All prices are plus delivery and vat and import tax.

I can get that manifold if anyone needs pricing, shoot me an email.

I think I have that nitrous kit also.

Thanks,

Joe

Perhaps a silly question, but are those welds on the manifold done by man or machine?

100% manual you can see the stop restarts along it every 4" lovey piece of work though

100% man you can see the stop restarts along it every 4" lovey piece of work though

The breaks in the weld were what made me ask, it looks very tidy for manual work Always nice to see good workmanship