Duffman Posted October 27, 2008 Share Posted October 27, 2008 Nearly got all my stuff I need for BPU Need to get the following fitted - Cat back exhaust, 1st decat, RR, FCD, Walbro fuel pump also to make sure plugs are gapped correctly. Don't really fancy having a go at this myself...does anyone know of someone in the Ayrshire(near glasgow) region who would take this on...for payment of course. Don't wanna take it into a normal garage who maybe don't know too much about Supra's. Cheers Sean Quote Link to comment Share on other sites More sharing options...
merckx Posted October 27, 2008 Share Posted October 27, 2008 Do you have a boost gauge, I wouldn't go BPU without one? You might not need a restrictor ring if you're leaving the second cat on the car, the boost you'll reach will also be influenced by the exhaust that you're fitting. Quote Link to comment Share on other sites More sharing options...
Duffman Posted October 27, 2008 Author Share Posted October 27, 2008 Do you have a boost gauge, I wouldn't go BPU without one? You might not need a restrictor ring if you're leaving the second cat on the car, the boost you'll reach will also be influenced by the exhaust that you're fitting. yeah have a boost gauge fitted...also have a HKS 2nd decat fitted at the moment...not sure ont he exhaust but will be 3" piping obv anyway. Quote Link to comment Share on other sites More sharing options...
Thorin Posted October 27, 2008 Share Posted October 27, 2008 If you're leaving the second cat in you don't need a restrictor ring... and in fact you'll probably need a boost controller if you want to increase the boost to 1.2bar. edit: posted before I saw your above reply. I'd fit new plugs too, if you're not sure what's in there already. It's a good idea to go a range colder for BPU... and I'd fit a new OEM UK spec pump rather than the walbro personally. Quote Link to comment Share on other sites More sharing options...
Duffman Posted October 27, 2008 Author Share Posted October 27, 2008 If you're leaving the second cat in you don't need a restrictor ring... and in fact you'll probably need a boost controller if you want to increase the boost to 1.2bar. edit: posted before I saw your above reply. I'd fit new plugs too, if you're not sure what's in there already. It's a good idea to go a range colder for BPU... and I'd fit a new OEM UK spec pump rather than the walbro personally. its got some greddy iridiums fitted at the moment...not sure what they are gapped too though will need to check Quote Link to comment Share on other sites More sharing options...
AlanM Posted October 27, 2008 Share Posted October 27, 2008 You do not gap iridium plugs Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.