madwoody1 Posted September 26, 2008 Share Posted September 26, 2008 wonder if anyone could shed some light on a problem thats just started on my car when i'm driving along at say 5-10 mph and stamp on the brakes there is a loud noise (clonk) and you can feel it through the car from the near side rear, when you brake it sounds like something is moving forward and then when you let off the brakes it moves back into position i've checked the boot and nothing lose in there anyone have any ideas so when i take a look at the weekend i have some bullet points to check cheers steve Quote Link to comment Share on other sites More sharing options...
n boost Posted September 26, 2008 Share Posted September 26, 2008 Sounds like your subframe bolts have worked loose or a knackered bush. Plenty of info onsubframe bolts if u search for it. Quote Link to comment Share on other sites More sharing options...
madwoody1 Posted September 26, 2008 Author Share Posted September 26, 2008 yea just had a look on here yhanks for that will get under tomorrow and see if they are tight or not Quote Link to comment Share on other sites More sharing options...
miko_supra Posted September 26, 2008 Share Posted September 26, 2008 check all your control arm bolts, shocks, subframe bolts for a start Quote Link to comment Share on other sites More sharing options...
madwoody1 Posted September 27, 2008 Author Share Posted September 27, 2008 ok been looking at the car for most of the day, think i've found what is at fault its a tie bar on the rear near side the small bar going from the hub to the sub frame its the one with the ball joint on the bush end is shot so where would be the best place to get one of these from? Quote Link to comment Share on other sites More sharing options...
merckx Posted September 27, 2008 Share Posted September 27, 2008 Stabiliser bar links? I can't remember who does them the cheapest but there's a fair difference in price between suppliers, best to do a search. Quote Link to comment Share on other sites More sharing options...
madwoody1 Posted September 27, 2008 Author Share Posted September 27, 2008 yea i'm not sure if thats what they are called after having a quick look around the net i think the toyota part number is 48720A LH but i could be wrong hopefully someone will come along and set me right Quote Link to comment Share on other sites More sharing options...
merckx Posted September 27, 2008 Share Posted September 27, 2008 (edited) 48720A - green arrow, 48720A isn't the part number, it's the part name code. The part number is 48710-14110 . The stabilizer bar links are the ones with the red arrow. LH Rear Stabiliser part number is: 48840 -14030 RH Rear Stabiliser part number is: 48830 - 14050 Edited September 27, 2008 by merckx (see edit history) Quote Link to comment Share on other sites More sharing options...
madwoody1 Posted September 28, 2008 Author Share Posted September 28, 2008 yea thats the part near side one 48720A - green arrow, 48720A isn't the part number, it's the part name code. The part number is 48710-14110 thanks merckx Quote Link to comment Share on other sites More sharing options...
madwoody1 Posted September 29, 2008 Author Share Posted September 29, 2008 ok think it is a rear near side toe control arm that has a bush one end and ball joint the other so where would i get one from? or is it toyota only? Quote Link to comment Share on other sites More sharing options...
SteveR Posted September 29, 2008 Share Posted September 29, 2008 Toyota (Steve Manley & ask for a discount), Paul Whiffin (UK) or Nic (Hong Kong) would be top of my list of people to contact. Quote Link to comment Share on other sites More sharing options...
loks Posted September 30, 2008 Share Posted September 30, 2008 Have you changed your brake pads lately? I got this low speed clonk when braking after I changed mine. The clip over the pads was fitted upside down which forced the pads backwards and moved forward slightly on braking causing the clonk. Mine are fine now with the clip fitted fitted correctly, however I still get a clonk when I reverse Hope you find the root cause. Quote Link to comment Share on other sites More sharing options...
madwoody1 Posted October 7, 2008 Author Share Posted October 7, 2008 well changed the rear toe control arm that paul w got me and its sorted the knocking out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.