Firestorm Posted August 24, 2008 Share Posted August 24, 2008 Hi guys i cannot remove all the bolts off the turbo pipe near the fire wall . got one off but the second one is a right PITA! any one got any ideas or suggests to remove it. its gonna end up being sheered if try any more... oh and ive used some plus gas.. to no avail. pete Quote Link to comment Share on other sites More sharing options...
miko_supra Posted August 24, 2008 Share Posted August 24, 2008 how long have you left the plus gas on for...i usually leave it about 24 hours for it to properly penetrate. it that fails, get a blow lamp on it Quote Link to comment Share on other sites More sharing options...
Firestorm Posted August 24, 2008 Author Share Posted August 24, 2008 yeh left it on for a while.. blow lamp LOL after that i guess a stick of dynamite! lol Edit... Crate of beer to the first person who can take this pipe off and help me fit the new one! LOL... Seriously! Quote Link to comment Share on other sites More sharing options...
Scott Posted August 24, 2008 Share Posted August 24, 2008 The blow torch should work. If you put some heat on the bolt it will crack through any rust with the expansion. Let it cool a tiny little bit then give it another go. Should be good to go. Quote Link to comment Share on other sites More sharing options...
Firestorm Posted August 24, 2008 Author Share Posted August 24, 2008 yeh but its getting the blow torch to the bolt dudes. its that tricky one that you cant see.. im gonna put it on axel stands and have a go from undeneath but its throuthe axel area so not sure how much that will work.. admitedly i was goin in from the top / goin underneath the turbo reaching around. hehe reach around lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.