Jump to content
The mkiv Supra Owners Club

Dash Panel Help


Nic
 Share

Recommended Posts

I have a customer who needs a right hand side ignition dash panel for a UK spec Supra. Unfortunately these have been discontinued and Toyota no longer have stock. I am not as familiar with the UK Spec Supra so need some clarification if anyone can help.

 

I believe all the UK spec Supras have 3 holes in the ignition panel for the 3 buttons as shown here, correct?

 

I can supply pre-facelift J-spec ignition dash panels, which are basically the same, but AFAIK these are only available with a single hole. Is there anyone with a pre-facelift J-spec Supra that has more than one hole in the ignition panel? If you do, would you mind sending me your frame and model number so I can check the part number.

 

http://img215.imageshack.us/img215/7140/trdwheel7eq.jpg

 

:thanks:

Link to comment
Share on other sites

I have a customer who needs a right hand side ignition dash panel for a UK spec Supra. Unfortunately these have been discontinued and Toyota no longer have stock. I am not as familiar with the UK Spec Supra so need some clarification if anyone can help.

 

I believe all the UK spec Supras have 3 holes in the ignition panel for the 3 buttons as shown here, correct?

 

I can supply pre-facelift J-spec ignition dash panels, which are basically the same, but AFAIK these are only available with a single hole. Is there anyone with a pre-facelift J-spec Supra that has more than one hole in the ignition panel? If you do, would you mind sending me your frame and model number so I can check the part number.

 

http://img215.imageshack.us/img215/7140/trdwheel7eq.jpg

 

:thanks:

Link to comment
Share on other sites

I have one of these UK spec 3 hole panels in my garage spare

 

Thanks Dean, is it in good condition? It is just I have supplied new panels for the rest of the dash and so the ignition panel will need to be in good condition so it will match.

Link to comment
Share on other sites

I have one of these UK spec 3 hole panels in my garage spare

 

Thanks Dean, is it in good condition? It is just I have supplied new panels for the rest of the dash and so the ignition panel will need to be in good condition so it will match.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.