Amir khan Posted August 8, 2008 Share Posted August 8, 2008 Hi guys just a small problem, Got myself a new windows mechanism after my last cable snapped After fitting it today, when i press the switch up the window goes down, and when i press it down it goes up! Its opposite, I was thinking can i cut the wires going into the motor and switch them over???? Or is there another fix? thanks! Quote Link to comment Share on other sites More sharing options...
tonyhawk Posted August 8, 2008 Share Posted August 8, 2008 That should work because when you put power directly into the mechanism (I had to do this when my engine was out, thus no battery), reversing the cables reverses the movement Quote Link to comment Share on other sites More sharing options...
ivan Posted August 8, 2008 Share Posted August 8, 2008 Did you buy a new mechanism or fix the old one with new bowden cable? Quote Link to comment Share on other sites More sharing options...
Amir khan Posted August 8, 2008 Author Share Posted August 8, 2008 I bought a new mechanism from Keron off here Quote Link to comment Share on other sites More sharing options...
ivan Posted August 8, 2008 Share Posted August 8, 2008 Strange, because it sounds like the bobbin has been wound backwards. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.