Guest CoolsBlue Posted July 29, 2008 Share Posted July 29, 2008 Hey all, anyone know the correct size of the screws needed to fit the rear plate? looks like 4mm but would just like confirmation Quote Link to comment Share on other sites More sharing options...
ivan Posted July 29, 2008 Share Posted July 29, 2008 You can get the proper plastic ones from any decent motor factors. Quote Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted July 29, 2008 Share Posted July 29, 2008 You can get the proper plastic ones from any decent motor factors. I did, but they were to big Quote Link to comment Share on other sites More sharing options...
baldy Posted July 30, 2008 Share Posted July 30, 2008 m6 i think the plastic ones can be forced in but it makes them very weak,i use allen screws now Quote Link to comment Share on other sites More sharing options...
merckx Posted July 30, 2008 Share Posted July 30, 2008 m6 i think I think so too, that's if you want the ones that screw into the metal bracket which is set in the aperture on the j spec car. Quote Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted July 30, 2008 Share Posted July 30, 2008 m6 i think the plastic ones can be forced in but it makes them very weak,i use allen screws now i had them plastic ones before, i remember removeing them with a plyers pulling from the back, i could see the fame bending a bit to, so would perfer screws, ill check out the m6 nuts, cheers ppl Quote Link to comment Share on other sites More sharing options...
suprattgaz Posted July 30, 2008 Share Posted July 30, 2008 They are definitley M6. I got some M6 x 10 stainless bolts for mine. Quote Link to comment Share on other sites More sharing options...
Guest CoolsBlue Posted July 30, 2008 Share Posted July 30, 2008 thanks for confirming mate:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.