toyotasupra1980 Posted July 14, 2008 Share Posted July 14, 2008 Hiya all, as the days are getting closer for me in having my n/a to TT with bpu conversion, one thing has come to light, the brakes, now i have the standard brakes and calipers, when the car is done and running over 400bhp obviously the brakes need to be changed but i have 18inch deep dish alloys which hug the front brakes and there is about an inch clearence, are there uprated brakes similar size to stop over 400bhp so that i dont have to get rid of my alloys?? Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted July 14, 2008 Share Posted July 14, 2008 You need UK spec brakes at the least... what size and offset are your wheels? It's an idea to make sure you've got the wheels for the brakes, not the other way round Quote Link to comment Share on other sites More sharing options...
toyotasupra1980 Posted July 14, 2008 Author Share Posted July 14, 2008 You need UK spec brakes at the least... what size and offset are your wheels? It's an idea to make sure you've got the wheels for the brakes, not the other way round will check tomorow, i have been told that the uk spec breaks would be ok, but i have also been told that i can give measurements for some uprated breaks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.