Wez Posted July 3, 2008 Share Posted July 3, 2008 Hey All, I have a set of Sparco Corsa seats and wondered if anyone knows what size bolt they use to fix the side mounts. Quote Link to comment Share on other sites More sharing options...
Wez Posted July 3, 2008 Author Share Posted July 3, 2008 Anyone? Quote Link to comment Share on other sites More sharing options...
Sharpie Posted July 3, 2008 Share Posted July 3, 2008 (edited) Are you talking about Side mount to seat OR Side mount to floor ? I used the Sparco hardware kit http://www.sparcousa.com/pseats_acc.asp?id=538 which, I assume is universal so, can check for you tomorrow on my seats. If it's Side mount to seat I have Milano's with the flat seat base. http://www.mkivsupra.net/vbb/attachment.php?attachmentid=14417&d=1113674710 Edited July 3, 2008 by Sharpie (see edit history) Quote Link to comment Share on other sites More sharing options...
Wez Posted July 3, 2008 Author Share Posted July 3, 2008 Sidemount to seat. The Sparco hardware kit looks ideal Quote Link to comment Share on other sites More sharing options...
Wez Posted July 3, 2008 Author Share Posted July 3, 2008 This looks like the job but I need for Sat http://cgi.ebay.co.uk/Competition-Seat-Bolt-Mounting-Pack-OMP-Sparco-MOMO_W0QQitemZ120278564568QQcmdZViewItem?hash=item120278564568&_trkparms=72%3A12%7C39%3A1%7C65%3A12&_trksid=p3286.c0.m14 Quote Link to comment Share on other sites More sharing options...
Sharpie Posted July 3, 2008 Share Posted July 3, 2008 OK, if you are in a rush, I'll go out to the garage now....give me 10mins. Quote Link to comment Share on other sites More sharing options...
Sharpie Posted July 3, 2008 Share Posted July 3, 2008 I found a few spares in my Nuts & bolts box that were left over. They are 8mm bolts with a hex end and the nuts take a 13mm spanner to tighten up. The Sparco bolts are also 12.9 SFA approved. A few pic's.. (Looks like the ebay link will do the job) Quote Link to comment Share on other sites More sharing options...
Wez Posted July 3, 2008 Author Share Posted July 3, 2008 I found a few spares in my Nuts & bolts box that were left over. They are 8mm bolts with a hex end and the nuts take a 13mm spanner to tighten up. The Sparco bolts are also 12.9 SFA approved. A few pic's.. (Looks like the ebay link will do the job) Thats great, thanks for checking Quote Link to comment Share on other sites More sharing options...
Sharpie Posted July 3, 2008 Share Posted July 3, 2008 I see you have Terry's seats, very blue! Quote Link to comment Share on other sites More sharing options...
Wez Posted July 3, 2008 Author Share Posted July 3, 2008 I see you have Terry's seats, very blue! Yep, they are a little bright, my runners arrived this morning along with my new steering wheel, was going to see how it all fits this weekend Quote Link to comment Share on other sites More sharing options...
Sharpie Posted July 3, 2008 Share Posted July 3, 2008 Please post up some pic's when you are done Quote Link to comment Share on other sites More sharing options...
Wez Posted July 3, 2008 Author Share Posted July 3, 2008 please Post Up Some Pic's When You Are Done Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.