iain2010 Posted June 15, 2008 Share Posted June 15, 2008 Ive noticed a few people have hard pipes between the inlet manifold and induction kit on there NA's I know turbo fit use to make them but is there anywhere you can get them from now? im not confident enough to have a go at making one myself! Quote Link to comment Share on other sites More sharing options...
iain2010 Posted June 18, 2008 Author Share Posted June 18, 2008 No one? Quote Link to comment Share on other sites More sharing options...
marc_p Posted June 18, 2008 Share Posted June 18, 2008 The general opinion is to stick with your stock airbox as you are more than likely just going to lose power with an aftermarket kit. But when you say 'hard pipe' do you meen something like samco hosing? Quote Link to comment Share on other sites More sharing options...
Missile Posted June 18, 2008 Share Posted June 18, 2008 I've got a Apexi hard pipe. Just an ally pipe with samco conection pipe to join the filter then use the standard rubber piping at the intake end. http://cgi.ebay.co.uk/Power-Enterprise-Air-Filter-Induction-Kit-Supra-NA_W0QQitemZ350033591250QQihZ022QQcategoryZ36680QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247 Quote Link to comment Share on other sites More sharing options...
iain2010 Posted June 18, 2008 Author Share Posted June 18, 2008 Thanks for the replies guys. Im either getting an Arc or Blitz sonic from Nic (My car has a crappy filter at the mo and no sign of the original airbox) Im just after an alloy pipe that replaces the plastic rubbish between the inlet and induction kit. Have you got a picture Missile? Where did you get yours from? Quote Link to comment Share on other sites More sharing options...
Missile Posted June 18, 2008 Share Posted June 18, 2008 I bought mine from a member via ebay im afraid. I've got loads of pic's but can't post them up due to the works internet policy. I can e-mail pic's for you to put on this thread if you like. I can't use site's like photobucket etc etc. Quote Link to comment Share on other sites More sharing options...
JODY T Posted June 18, 2008 Share Posted June 18, 2008 Iain the best thing is to spend ur money on a standard OEM box and K&N filter.. Why waste money on things that dont work Quote Link to comment Share on other sites More sharing options...
iain2010 Posted June 18, 2008 Author Share Posted June 18, 2008 (edited) Iain the best thing is to spend ur money on a standard OEM box and K&N filter.. Why waste money on things that dont work You know me mate i love wasting money!!! Anyways how you been? Ill have to get in touch shortly. Could do with your stage 1 geo setup. I have major tramlining!! Would you guys at interpro be able to knock me up a pipe for the induction kit? Edited June 18, 2008 by iain2010 (see edit history) Quote Link to comment Share on other sites More sharing options...
Missile Posted June 18, 2008 Share Posted June 18, 2008 Iain the best thing is to spend ur money on a standard OEM box and K&N filter.. Why waste money on things that dont work Because it sounds so much better. Makes very nice roar. Quote Link to comment Share on other sites More sharing options...
Missile Posted June 18, 2008 Share Posted June 18, 2008 After sending an e-mail and forgetting the attachment, Pic sent mate... Quote Link to comment Share on other sites More sharing options...
iain2010 Posted June 18, 2008 Author Share Posted June 18, 2008 Thanks for the pictures mate. Thats smart. Fancy selling! Quote Link to comment Share on other sites More sharing options...
Missile Posted June 18, 2008 Share Posted June 18, 2008 Thats not even a very good pic. Selling it, I'm afraid not. From looking at it it would be easy to make and would not cost alot at all. One shiny ally pipe and your done. Quote Link to comment Share on other sites More sharing options...
iain2010 Posted June 18, 2008 Author Share Posted June 18, 2008 I was going to say i think its custom. Does it have anything that needs to go into the pipe (Ie breathers) or is it just a straight bit of pipe? Quote Link to comment Share on other sites More sharing options...
Missile Posted June 18, 2008 Share Posted June 18, 2008 One straight pipe. Two holes. One smaller than the other, Get a rubber bung in each then put a vacum hose in one and then a sensor in the other. You can just see via the piccy. Quote Link to comment Share on other sites More sharing options...
Dazzi Posted June 18, 2008 Share Posted June 18, 2008 The general opinion is to stick with your stock airbox as you are more than likely just going to lose power with an aftermarket kit. But when you say 'hard pipe' do you meen something like samco hosing? Hmm lose power ey? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.