Homer Posted June 15, 2008 Share Posted June 15, 2008 Is swapping the trans tunnel plate the only way to do this - or is there a simpler option? (e.g. currting the auto plate to fit?) Quote Link to comment Share on other sites More sharing options...
johnd-mkiv Posted June 15, 2008 Share Posted June 15, 2008 No it has to be done with the correct pannel to gain anouther 50mm in hight, if you take the carpet out drill out all the spot welds then peel the old one away from under neith, i bought a secondhand one from jez and bolted it back in with 6mm bolts using the spot weld holes, mastic the joints too Quote Link to comment Share on other sites More sharing options...
Homer Posted June 15, 2008 Author Share Posted June 15, 2008 Thanks mate Had a feeling the manual was was higher after looking at the scrap car this weekend. I like the idea of using the bolts, that'll be far easier than having to weld it (then have to cut it out again for the next conversion!) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.