drnas78 Posted June 8, 2008 Share Posted June 8, 2008 Ive had by face lift lights (plastic lense) refurbed short while back by gzaeronjon , But they could now do with a good lense clean (from the outside) any suggestions on a good polish or lens clearner which would remove any marks and clean the lense. Quote Link to comment Share on other sites More sharing options...
Ben-san Posted June 8, 2008 Share Posted June 8, 2008 Some say Brasso, some say T-Cut, others say Megiuar's Scratch-X. The guide on mkiv.com mentions a lot of american products which may be difficult to get hold of here - but as you see above, the general consensus seems to be on mild cutting compounds followed by a good buffing. Quote Link to comment Share on other sites More sharing options...
pablo1971 Posted June 8, 2008 Share Posted June 8, 2008 Megiuar's plastx is really good and be bought from any halfords or motorist discount shops Quote Link to comment Share on other sites More sharing options...
Havard Posted June 8, 2008 Share Posted June 8, 2008 I used brasso a couple of weeks ago and the lenses look terrific. I only did about 5 mins on each lense so I am going to give them another go and see if that makes them evenb better. I think any mild polish will do the job!! H. Quote Link to comment Share on other sites More sharing options...
drnas78 Posted June 8, 2008 Author Share Posted June 8, 2008 were did you purchase the brasso from please Quote Link to comment Share on other sites More sharing options...
ivan Posted June 8, 2008 Share Posted June 8, 2008 Tesco / Sainsbury / Asda / Coop / any hardware store / ....... (you get my drift?) Quote Link to comment Share on other sites More sharing options...
FuR Posted June 8, 2008 Share Posted June 8, 2008 PlastX gets my vote, get it on ebay easily enough, gets out light scratches and polishes up really nice Quote Link to comment Share on other sites More sharing options...
SilverSoop Posted June 9, 2008 Share Posted June 9, 2008 I'll try Brasso then as my passenger side headlight has started to go a 'bit' yellow... Quote Link to comment Share on other sites More sharing options...
Havard Posted June 9, 2008 Share Posted June 9, 2008 I'll try Brasso then as my passenger side headlight has started to go a 'bit' yellow... Oooh, I wouldn't use Brasso mate!!..... Sorry, I just like taking the p!ss..!! H. Quote Link to comment Share on other sites More sharing options...
supra_si Posted June 9, 2008 Share Posted June 9, 2008 i used autoso last week when i took mine apart. brought them up like new. most of the grime and decolouring was on the outside. a cpl of coats of autosol and will be like new. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.