captainchaos Posted May 7, 2008 Share Posted May 7, 2008 Just got the parts for my -12 breather kit, just waiting for the hose now. Gonna bring the cam covers into work tomorrow to weld the fittings on and polish the cam covers up some more. Also getting a custom catch can fabbed up over our other factory. Quote Link to comment Share on other sites More sharing options...
b_have Posted May 7, 2008 Share Posted May 7, 2008 Why the T piece? Quote Link to comment Share on other sites More sharing options...
captainchaos Posted May 7, 2008 Author Share Posted May 7, 2008 running it the same way as this Quote Link to comment Share on other sites More sharing options...
b_have Posted May 7, 2008 Share Posted May 7, 2008 If you are retaining the centre balance pipes (linking the camcovers) and the Tee is -12 to -12, the pipe from the inlet cam isn't doing anything. IYSWIM. Quote Link to comment Share on other sites More sharing options...
b_have Posted May 7, 2008 Share Posted May 7, 2008 If you use independant lines (2x-12) to the catchcans and evacuate with a single larger line, it may be more effective. Quote Link to comment Share on other sites More sharing options...
captainchaos Posted May 7, 2008 Author Share Posted May 7, 2008 so whos car is that in the picture i attached? Quote Link to comment Share on other sites More sharing options...
baldy Posted May 7, 2008 Share Posted May 7, 2008 where did you get the fittings from?was it expensive ? been looking at doing this myself for a while now cheers for any help baldy Quote Link to comment Share on other sites More sharing options...
captainchaos Posted May 7, 2008 Author Share Posted May 7, 2008 actually been talking the guy who supplied the parts into maybe a group buy to get them cheaper for members on here, inc welding the flanges onto the cam covers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.