captainchaos Posted April 29, 2008 Share Posted April 29, 2008 Been doing a slam panel for hodge and as we all know he likes his shiney bits so i thought i'd do him a little something extra. (just to see how it comes out really) Quote Link to comment Share on other sites More sharing options...
miko_supra Posted April 29, 2008 Share Posted April 29, 2008 looks great! Quote Link to comment Share on other sites More sharing options...
DamanC Posted April 30, 2008 Share Posted April 30, 2008 Agreed looks like you have a little bit of tallent there sir, any thing else planned? Thought about selling them on the forum? Quote Link to comment Share on other sites More sharing options...
supra_si Posted April 30, 2008 Share Posted April 30, 2008 im sure theres some money to be made from that craftsmanship Quote Link to comment Share on other sites More sharing options...
Guigsy Posted April 30, 2008 Share Posted April 30, 2008 Indeed. Id pay good money to have that About 2 foot long would be excellent wall ornament for my office How much? Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 30, 2008 Author Share Posted April 30, 2008 it was just a test to be honest, but if people are interested in them why not. Guigsy do you want mirror finish or brushed finished stainless. Im busy getting quite a few designs done: Supra slam panels Slam panel incorporating rad cover etc (stainless and bent up) Skyline slam panels Air diversion plates Covers for inner wings Sub guards/defenders badges/logo's various makes and models Busy designing plug cover at the min, machined from ally Made a harness bar up for the back of my supra. Whn i get it running properly its coming into the factory to have a cage custom made and the trial rear end ally boxed into the rear subframe to stop drag being caused by it and reducing the chance of it wanting to go bouncing down the road. Done quite a few badges/logos in the past for peoples boot builds with a couple of bolts welded onto the back so they can be attached and then pulled into the foam giving a flush look. You name it really if i can draw it on the comp i can make it somehow. Quote Link to comment Share on other sites More sharing options...
Guigsy Posted April 30, 2008 Share Posted April 30, 2008 You can do me one about 2 ft accross for my wall? That would be awesome If so ill have it mirror finish please Any idea on cost? Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 30, 2008 Author Share Posted April 30, 2008 2ft no problem, shall have a price for you soon, Quote Link to comment Share on other sites More sharing options...
michael Posted April 30, 2008 Share Posted April 30, 2008 I wonder if you could make a slam panel that's the Supra logo? A few mounting points might need adding of course and it won't force air through the rad / IC but it would look a bit different to the norm. Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 30, 2008 Author Share Posted April 30, 2008 I wonder if you could make a slam panel that's the Supra logo? A few mounting points might need adding of course and it won't force air through the rad / IC but it would look a bit different to the norm. Had a quick tinker with that idea to get the whole supra logo in the space, none of the original holes are in the right position, but im some hidden bracketry could be made up for it Quote Link to comment Share on other sites More sharing options...
michael Posted April 30, 2008 Share Posted April 30, 2008 Had a quick tinker with that idea to get the whole supra logo in the space, none of the original holes are in the right position, but im some hidden bracketry could be made up for it The brackets could always be painted black to hide them anyway I guess - would look quite nice though, or maybe the TRD logo as that's a bit more suited to the shape of the hole. Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 30, 2008 Author Share Posted April 30, 2008 The brackets could always be painted black to hide them anyway I guess - would look quite nice though, or maybe the TRD logo as that's a bit more suited to the shape of the hole. Mind reader lol already started drawing one Quote Link to comment Share on other sites More sharing options...
DamanC Posted April 30, 2008 Share Posted April 30, 2008 Quite a bit! Id like one of those huge logos, say about 3ft or 4ft long? Polished too. I would be very interested in some of the other bling and I suspect alot of the other members would too Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 30, 2008 Author Share Posted April 30, 2008 got a few dif slam panel designs cut over the weekend shall be on fleebay soon. Quote Link to comment Share on other sites More sharing options...
CarlT67 Posted April 30, 2008 Share Posted April 30, 2008 Looks great on black...! I would be interested to here the price of these ornamental sizes Quote Link to comment Share on other sites More sharing options...
colsoop Posted April 30, 2008 Share Posted April 30, 2008 Enough advertising get that trader status sorted Quote Link to comment Share on other sites More sharing options...
michael Posted April 30, 2008 Share Posted April 30, 2008 Enough advertising get that trader status sorted You could sell him what's left of yours Quote Link to comment Share on other sites More sharing options...
colsoop Posted April 30, 2008 Share Posted April 30, 2008 You could sell him what's left of yours Its under offer at the moment. Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 30, 2008 Author Share Posted April 30, 2008 Enough advertising get that trader status sorted been thinking about that, but probs as hobbiest for the time being as there are other things in the pipeline on a larger scale and need to see how they plan out first. As this company is my family company which is priority and im having to take more and more responsibility here as time goes on. Quote Link to comment Share on other sites More sharing options...
colsoop Posted April 30, 2008 Share Posted April 30, 2008 been thinking about that, but probs as hobbiest for the time being as there are other things in the pipeline on a larger scale and need to see how they plan out first. As this company is my family company which is priority and im having to take more and more responsibility here as time goes on. You obviously have the equipment and skill and there certainly is a market you should seriously think about it But as you say it means taking time away from other areas. Incidentally i think a 6 ft Supra badge would look cool for the club stand Quote Link to comment Share on other sites More sharing options...
captainchaos Posted April 30, 2008 Author Share Posted April 30, 2008 plus there this aswell Traders *** The club is not accepting any new applications until further notice.*** Quote Link to comment Share on other sites More sharing options...
captainchaos Posted May 1, 2008 Author Share Posted May 1, 2008 Prices prices as requested for badges from mirror finish 316 st/st small 155 x 40 £5.00 med 310 x 80 £8.00 (as hodges) large 1290 x 330 £35.00 3Ft long £45.00 4ft long £55.00 Slam panels £30.00 - £35.00 depending on etching etc Delivery inc on smaller items and slam panels Larger items i need to check out for delivery charges Delivery inc for slam Panels. Quote Link to comment Share on other sites More sharing options...
MRX Posted May 1, 2008 Share Posted May 1, 2008 Medium for me..! Quote Link to comment Share on other sites More sharing options...
captainchaos Posted May 2, 2008 Author Share Posted May 2, 2008 Have 5 medium badges available for mid next week: 1.MRX 2. 3. 4. 5. and 4No mirror finish slam panels £30.00 inc delivery and st/st fitting bolts Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.